More info about can you use a belt sander on hardwood floors

As I have said many times before sanding hardwood floors by hand can be a lot of hard work. You don’t want to be caught short There are some hand sanding tools that will have you sanding even a small area, for an eternity! If you plan on sanding wood floors with hand sanders, it is going to be very tiring and time consuming.

There are many different sanders which can be used on hardwood floors, but for larger rooms it may be better to start out with a belt sander. A belt sander works wonders on the bulk of the room, and its best used in conjunction with a floor edger sander which is better suited for the areas of the hardwood closer to the walls. Below, we have detailed all the steps on how to sand hardwood floors with a belt sander to get the most of your next refinish.

The wooden floor should have a belt sander to complete the handhold one so you can rotate the device to the outside of the floor. The initial step in our ‘How to use a belt sander on hardwood floors’ is outfitting the old finish. If you are not 100% sure of the level, you can bolt the room and leave it for 24 hours in case of utilizing a belt sander for hardwood floors.

can you use a belt sander on hardwood floors Related Question:

How long does it take to sand hardwood floors with a belt sander?

It can take 1-5 days for a professional and 2-15 days for a DIY enthusiast, depending on the size and condition of the floor. For planning purposes, it would take 1-day per room for a professional and 2 days per room for a homeowner doing DIY.

What kind of sander is best for hardwood floors?

The drum sander is the real workhorse of hardwood floor sanding. It is a massive piece of equipment, too heavy for most people to lift—two people are required to carry it.

Can you get a good finish with a belt sander?

Because they have a lot of power and can handle coarse grits, they excel at the rapid removal of wood. Also, unlike orbital and vibrating sanders, the sanding action is linear, so even with coarse grits you can sand with the grain and get a good-looking result.

Leave a Reply

Your email address will not be published. Required fields are marked *