If you’ve bought your angle grinder second-hand and the spanners are missing, there are other ways to change the disc without the factory-made spanners. Turn the pronged spanner in the opposite direction of the disc direction arrow, located on the bottom, while using the wrench spanner to keep the disc from turning. Use the vice grips to keep the disc from spinning, and insert the screwdriver into one of the holes between the disc and the angle-grinder motor, meant for the spanner prongs.
An angle grinder disc can be removed without the tool by pressing in the spindle lock to lock the disc and turning the wheel in an anti-clockwise direction. Now that we have covered how you can remove a disc without the pin wrench, let’s also go over how to remove a disc with the proper tool and how to put a new disc on the angle grinder. There you have it, all the possible ways to remove a disc from an angle grinder without the use of the tool that comes with the grinder.
The first sign that your angle grinder blade needs replacement is if it has worn down to the point where it is taking you significantly longer to cut through something than when the blade was new. Let’s go through a simple step by step process on how to change an angle grinder blade right now. If you don’t have the factory spanners to replace the blade, there are ways of replacing the blade on your angle grinder without them.
how to change bosch angle grinder disc Related Question:
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
Which way should an angle grinder spin?
Every right-angle grinder is marked with a directional arrow on the head of the grinder that indicates the direction the wheel is rotating when in use. For optimal performance, it’s important to orient the cutting wheel so it rotates into and pulls itself into the workpiece rather than rotating away from the workpiece.
Are angle grinder discs universal?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
Which is the first step in replacing a grinding wheel?
To change the grinding wheel, the operator shuts down the surface grinder with the controls on the front of the machine, removes the wheel guard (usually two hand knurled nuts) and proceeds to loosen the wheel retainer nut.
