An angle grinder disc can be removed without the tool by pressing in the spindle lock to lock the disc and turning the wheel in an anti-clockwise direction. Now that we have covered how you can remove a disc without the pin wrench, let’s also go over how to remove a disc with the proper tool and how to put a new disc on the angle grinder. There you have it, all the possible ways to remove a disc from an angle grinder without the use of the tool that comes with the grinder.
How to change angle grinder blade is important know-how that every user should have to operate their tool safely and properly. If you don’t have any available factory or improvised keys, you can still change your angle grinder blade by hand. Learning how to replace a blade on an angle grinder is crucial know-how for every user as this replacement will eventually happen one way or another.
How do I change the disc on makita grinder 9501b – Fixya. Loading…. Oops :Please try again.
With the grinder unplugged, turn the grinder upside down so that you are looking at the grinding wheel and the locking apparatus. Since the grinding wheel rotates toward you, the right-side wheel nut is threaded as you’d typically expect and unscrews by turning the nut toward the front of the grinder. Cutting wood with an angle grinder carries the risk of injury to the tool operator.
how to change makita angle grinder disc Related Question:
How do I loosen my Makita angle grinder?
Place the lock not wrench onto the lock nut holding the disc in place. Turn the lock nut wrench counter-clockwise to loosen the lock nut.
How do you use a grinding disc?
When Surface Grinding and Using Flap Discs For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface. Position the blade guard at the back towards your body. Use a smooth back and forth motion to guide the flap disc over the material.
Which way do you loosen an angle grinder?
Here’s the easiest way to change an angle grinder wheel: Hold the wheel lock button down and turn the wheel until it locks. Turn the Kwik Lock flange counterclockwise by hand until it loosens.
What tools use to remove the angle grinder discs?
A pin wrench is the required tool that comes with an angle grinder and is used to remove a disc. This wrench resembles a pitchfork and has two knobs on the end that you insert into the drive bolt to loosen the nut holes that attach to the disc.
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
What is a flap disc for grinder?
A flap disc is an abrasive product designed for right-angle grinder applications that consists of overlapping abrasive “flaps” glued radially to a backing plate. Flap discs became popular for benefits like fast stock removal and the ability to perform grinding, blending, and finishing in one product.
What is a backing pad?
A backing pad is a power tool attachment that secures and supports accessories used for sanding and polishing. The abrasive or polishing medium is held securely on the face of the backing pad by means of a locking disc or hook and loop fasteners.
