We show you several ways of how to change an angle grinder wheel. Slip your new angle grinder wheel on, and reverse the process. My favorite way to replace an angle grinder wheel involves switching out the stock flange with a Hilti Kwik-Lock flange.
If you’ve bought your angle grinder second-hand and the spanners are missing, there are other ways to change the disc without the factory-made spanners. Turn the pronged spanner in the opposite direction of the disc direction arrow, located on the bottom, while using the wrench spanner to keep the disc from turning. Use the vice grips to keep the disc from spinning, and insert the screwdriver into one of the holes between the disc and the angle-grinder motor, meant for the spanner prongs.
One of the simplest ways on how to remove angle grinder disc is by use of spanners from the manufacturer. Other ways still available on how to remove angle grinder disc without a tool. Before you think of removing the angle grinder wheel, kindly disconnect the angle grinder from the primary power source.
How to remove an angle grinder disc without the tool. How to remove an angle grinder disc the appropriate way. Now that I’ve shown you how to remove an angle grinder disc without the tool, I’m going to tell you how to do it with the appropriate tool.
how to change pad on angle grinder Related Question:
How do I get the disc off my angle grinder?
Using the palm of your hand, slide the disc in the direction opposite to the arrow on the disc. This should loosen the nut enough to remove it with your fingers. If that doesn’t work, you can use pliers to break the old disc into pieces, giving you better access to the drive bolt and retaining nut.
When should I replace my angle grinder disc?
Always replace a cutting disc if it shows any signs of damage. This includes, but is not limited to visible cracks and chips or any signs of bending or twists to the wheel. Cut off wheels should be replaced when they hit their expiration date. This can be found imprinted on the metal center of the disc.
How do you unstick a grinder?
Do not crush it if you put the grinder head in a vise. You can use a rubber or plastic mallet to tap on the retaining ring. If it still won’t budge, get a torch and heat the retaining ring to expand, then tap sharply, but not too hard, with a light hammer.
What is the thread on an angle grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
When should you throw away a cutting wheel?
If you do not know, a good “rule of thumb” is to discard the wheel when you are 1” away from the recess. Portable cup wheels must be discarded when the machine’s guard prevents proper grinding. In this case a proper guard will determine discard size by preventing additional grinding on the wheel’s rim.
How long do grinding discs last?
1 – Cutting and Grinding Discs Have Expiry Dates. This date is generally printed on the centre ring and is at a maximum three years from the manufacture of the disc. On smaller discs which lack a ring, this date may be printed on the label or even the disc itself.
Is it OK to use a cut off wheel as a grinder wheel?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
Which is the first step in replacing a grinding wheel?
To change the grinding wheel, the operator shuts down the surface grinder with the controls on the front of the machine, removes the wheel guard (usually two hand knurled nuts) and proceeds to loosen the wheel retainer nut.
Which way do you loosen a Makita angle grinder?
Place the lock not wrench onto the lock nut holding the disc in place. Turn the lock nut wrench counter-clockwise to loosen the lock nut.
Which way should an angle grinder spin?
Every right-angle grinder is marked with a directional arrow on the head of the grinder that indicates the direction the wheel is rotating when in use. For optimal performance, it’s important to orient the cutting wheel so it rotates into and pulls itself into the workpiece rather than rotating away from the workpiece.
