In this video, Chris touches on the main points to keep your table saw clean and rust-free, as well as, maintaining all of the mechanisms so your table saw will run smoothly and make accurate cuts. One of the most important things you can do to keep your table saw in top shape is a simple cleaning once a month. Download a free article with even more tips and techniques to tune up your table saw here: Table Saw Tune-Up. Download a free, how-to article on giving your cast iron table saw top a new makeover here: Table Saw Makeover.
It’s perfectly OK to use a chemical rust remover as and when needed to treat rust on any woodworking tool, as long as you follow this with appropriate post-cleaning treatment. The two main ways to prevent rusting on exposed steel and iron are oil and wax. With a buffed waxed surface it’s great, actually better than if untreated.
The manufacturer goes through a lot of trouble to make your table flat, and using powered sanders can make your table not flat in a surprisingly short period of time. Find a can of penatrating oil will work and spray the entire table top down and let it soak for about 5-10 minutes. Test table top by running your fingers across the table, they should not slide but kinda hop across the table if its clean.
how to clean new table saw top Related Question:
Should you wax a table saw?
Using paste wax is the best way to lubricate the top of your table saw, which will help wood pieces slide across more smoothly when making cuts. First wipe on a light coat of paste wax all across the top surface of the table saw, making sure to cover all areas that come in contact with wood when you use it.
What kind of wax do I use on my table saw?
Paste wax is known to be the best type of wax for lubricating a table saw. In fact, expert woodworkers recommend that users should frequently apply a fine coat of paste wax on the table saw blades. Stay away from any waxes that contain silicone oil, as this can linger and damage your wood.
What oil keeps tools from rusting?
Best Rust Prevention for Hand Tools That’s where boiled linseed oil can help. It forms a hard protective film when it dries, the perfect way to prevent rust and damage on hand tools. I coat the blades and wooden handles of all my outdoor hand tools with it at least once a season.
Is WD-40 harmful to wood?
Just rub a generous amount of WD-40 into the wood. It shields the wood from moisture and other corrosive elements and keeps it smooth and splinter-free for the life of the tool. Here’s another way to renew wooden tool handles.
Can I use mineral spirits to clean table saw?
Scour the surface with mineral spirits and synthetic steel wool or 400-grit wet-or-dry sandpaper. Wipe off the surface with a clean cloth, and repeat as necessary. Even when rubbed with paraffin wax, the cast-iron top on a new tablesaw may tarnish and start to rust.
Does WD-40 clean cast iron?
Another way to remove rust from any metallic surface, not just a cast-iron stovetop, is to use WD-40. WD-40 Multi-Use Product protects items against rust and removes rust from them. Simply soak your cast iron stovetop for a short period of time and then scrub it with a wire brush.
How do you clean a metal table top?
Metal furniture is best cleaned with a cloth or sponge using water and mild, non-detergent soap and wiped dry. Abrasive scrubbers or cleaners should not be used as they can scratch the finish, potentially exposing the metal to rust-inducing moisture.
Can you use Turtle wax on table saw?
Worked great on the wood so I tried it on my bandsaw. I applied it liberally ( about 10 times as much as needed ) and let it dry while I went to work.
What kind of wax is Johnson’s Paste Wax?
A solubilizer like deodorized naphtha helps keep our product formula well mixed. Carnauba wax is a naturally derived film former that can also be found in cosmetics and skin care products. It creates a protective coating or shine on a surface.
What is butcher wax?
Butcher’s wax, also known as Bowling Alley wax, is a blend of carnauba and microcrystalline waxes blended with Mineral spirits and turpentine. Also called Butcher’s wax, Bowling Alley wax has been used to clean and polish wood floors, furniture, metal, leather, and musical instruments.
How do you remove rust from a table saw bed?
Mineral Oil or WD-40 Apply a sufficient amount of oil to the table before you begin to scrub, but make sure not to be excessive, since you’ll need to wipe off the oil when the scrubbing is done. Scrub the metal table thoroughly using both circular action and back-and-forth motions until all rust has been eliminated.