Quickly and safely condense your blades for convenient storage. After removing the clip or masking tape, hold one outside blade coil in each hand with the teeth pointed away from you, and slowly spread them apart. Extend your arms away from your body and spread your hands apart as you continue to uncoil the blade.
George Vondriska demonstrates the best way to remove rust from a cast-iron tool table. George Vondriska teaches you how to use a paper joint for your bowl turning. George Vondriska demonstrates how to use an Epilog laser engraver to cut templates and inlays in your shop.
Set blade on the floor and step on it (don’t grind the blade into the floor which could dull the teeth0. Rotate hand counter-clockwise while pushing down on the blade. The blade will coil into a manageable-but still somewhat dangerous-coil.
The best way to store a band saw blade is in a coil, the way it came from the factory. Speaker 1: The safest way to store bandsaw blades is in a coil. Learning how to coil your bandsaw blade isn’t difficult, it just requires a little bit of practice, some heavy gloves and some safety glasses.
how to coil a bandsaw blade Related Question:
Can you flip a bandsaw blade inside out?
Just turn them inside out, it doesn’t make any difference. The only difference is what side they had up when they welded them. When I get blades from WM, they are ready to go on the mill.
What direction should the teeth on a band saw face?
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves.
Where is the danger zone of the band saw?
The area to the right of the band saw is a danger zone.