Quickly and safely condense your blades for convenient storage. After removing the clip or masking tape, hold one outside blade coil in each hand with the teeth pointed away from you, and slowly spread them apart. Extend your arms away from your body and spread your hands apart as you continue to uncoil the blade.
The best way to store a band saw blade is in a coil, the way it came from the factory. Speaker 1: The safest way to store bandsaw blades is in a coil. Learning how to coil your bandsaw blade isn’t difficult, it just requires a little bit of practice, some heavy gloves and some safety glasses.
Set blade on the floor and step on it (don’t grind the blade into the floor which could dull the teeth0. Rotate hand counter-clockwise while pushing down on the blade. The blade will coil into a manageable-but still somewhat dangerous-coil.
how to coil up a bandsaw blade Related Question:
Can you flip a bandsaw blade inside out?
Just turn them inside out, it doesn’t make any difference. The only difference is what side they had up when they welded them. When I get blades from WM, they are ready to go on the mill.
How tight should a bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
What causes bandsaw blade drift?
Drift is cause because the blade buckles under the load. You can see that by stretching a ribbon between 2 points and applying a pressure to one of the edges, it will turn sideway easily. A sharp blade and high blade speed will help a lot with that.