We have seen circular saws used as table saw replacements with the Eurekazone tracksaw system, and now there is a new system from PUPS that can turn a circular saw to an accurate miter saw. The PUPS system is a really cool looking setup that has been designed to work with 95% of the circular saw on the market. There is a pair of rails that the circular saw rides on and these rails are completely adjustable to fit different saw widths.
I just have an ordinary circular saw that I use a few times a month for DIY and home improvement things. It seems to be defunct and probably cost more than a half decent miter saw on its own.
If you’re unfamiliar with the safe operation of either a circular saw or a chop saw, do not proceed with this project. Tip: Half-inch poplar is thin enough to ensure the saw doesn’t rest too far above the wood you’ll eventually cut with this DIY chop saw, but it’s also strong enough to reliably hold the saw in place. Without the saw in place, adjust the nuts on the rear lock and the bolt in the front lock until the saw platform rests snugly up against the piece of wood you’re cutting.
how to convert circular saw to miter saw Related Question:
Can I turn my circular saw into a miter saw?
We have seen circular saws used as table saw replacements with the Eurekazone tracksaw system, and now there is a new system from PUPS (Portable Universal Power Station) that can turn a circular saw to an accurate miter saw.
Can a circular saw cut 45 degrees?
Making 45-degree cuts with a circular saw might seem like an intimidating process, but with a little bit of preparation and practice, anyone can do this. There are two possible 45-degree angle cuts with a circular saw, a bevel cut, and a miter cut.
Can you use circular saw instead of miter?
While a miter saw is more accurate and better at angles, a circular saw is more portable and best for rough cutting dimensional lumber. And a miter saw is used for cutting across the grain (cross-cut) only. While a circular saw can do both but with less accuracy.
Can I use a circular saw with a Mitre box?
6. When extreme precision isn’t required, you can cut 45-degree miters using a portable circular saw and speed square. 7. Hold the square against the board, then guide the saw along the square to make the cut.
Can you convert a circular saw to a table saw?
If you’ve got a corded circular saw in good condition but is gathering dust, convert it into a table saw by building one from scratch.
Can I use a circular saw to cut angles?
All circular saws can be adjusted to make angled bevel cuts up to at least 45 degrees.
What is the difference between miter saw and circular saw?
Differences Between a Miter Saw and a Circular Saw A miter saw is stationary and the blade is pulled downward onto the wood, while a circular saw is handheld and the blade is pushed through the wood. A circular saw excels at breaking down sheet goods, and a miter saw is best for cutting down longer boards.
Do I really need a miter saw?
Miter saws are a valuable tool for the DIYer, and a must-have tool for a fully functioning workshop. They are designed to quickly cut crown molding, door frames, window casings, and picture frames. Miter saws can also make straight cuts for general do-it-yourself woodworking projects.
What is an advantage of the circular saw over the miter saw?
Miter saws are far more precise than circular saws, and they’re also easier to use. With a handheld circular saw, you need to line the blade up just right, hold it to a steady course, and attend to a lot of safety features. Miter saws get you more precise edges with less risk of injury.
Can a miter saw cut straight?
Power miter saws are designed to make angled cuts for moulding, trim work, rafters and other general carpentry applications. The saws also make straight crosscuts and, when equipped with the right blade, the versatility of a miter saw is an important part of a tool arsenal for professional carpenters as well as DIYers.
What is the difference between a table saw and a circular saw?
Circular saws are lightweight, hand-held, and can be moved from jobsite-to-jobsite with ease. A table saw is heavier and more complex in its set up. Because of its weight and footprint, this tool is more difficult to move these saws around as easily as you are able to do with a circular saw.
What is the best way to cut a 45 degree angle?
Miters: Use a Sharp Saw Blade Check your blade for sharpness by cutting a 45-degree miter on a 1×3 or larger piece of oak or other hardwood. If you don’t know how to cut a 45 degree angle, just look at the angle measurements on the base of the miter saw.
