Steps: Mark the cut line onto the workpiece, then measure the distance from the circular saw blade to the edge of the saw shoe. Guide the circular saw along the fence to trim the base to the proper width. Then guide the saw along the fence to make an accurate, perfectly straight cut.
I planned to replace it once I settled into my new house, but when the time came to build a room divider/bookshelf unit, I decided to build a couple of my own makeshift circular saw guides instead. The guides are compact and store easily. It’s quick, safe and especially useful when you need to cut a sheet of plywood down to size or to rip a long straight edge on a wide piece of lumber to prepare it for further ripping on a table saw. The only difference is that I put a 1 x 2 stop on the bottom, perpendicular to the 1 x 4 guide, which automatically squares the guide across the piece being cut.
Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
Making straight cuts in plywood is super easy when you have a straight edge to guide your saw. How To. See how easy and fast it is to make this Circular Saw Straight Edge Guide. Now you can have both of these cuts done for you at your home center, but if you have another sheet of plywood laying around that still has a straight factory edge on it, or another long straight edge, you can use that.
how to create a circular saw guide Related Question:
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Is there a guide for a circular saw?
A circular saw guide rail is a critical tool for making straight cuts on large boards, but choosing the best one for your workshop is not easy because there are many brands available, and a lot of newer woodworkers aren’t sure how to tell the difference from one brand to the next.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
Can you use Makita circular saw on guide rail?
Enables use of DHS680 Circular Saw with the Makita guide rail system. This adaptor can be attached to Makita circular saws, which allows you to use the circular saws with the Makita SP6000 guide rail system for precise, straight routing cuts.
What is a rip guide on a circular saw?
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting.
Does Kreg rip cut work with any circular saw?
A: Yes, the Rip-Cut will fit that saw fine. Helpful? A: The Kreg Rip-Cut is designed to work with a full size 7 1/4″ corded circular saw.
How do you cut straight with a circular saw without a guide?
To ensure a straight cut, press the saw firmly against the straightedge as you push it along. Clamp a perfectly straight board or metal straightedge to a sheet of plywood to make cabinet-quality straight cuts.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Is it a guardrail or guide rail?
According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.” Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
Are track saws worth it?
Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
What is a plunge saw used for?
Plunge saws are perfect for making smooth, straight cuts and are often used with a track or guide to improve accuracy. They work when the blade is plunged down to the required depth and engages with the workpiece.
