One Drawer Down, Three To Go. If your band saw box has more than one drawer, go ahead and cut out the rest of them now. The next step is to create the cavities that make the drawers, drawers. Be sure to put the drawers into their respective places – especially with oddly-shaped drawers – to make sure you get the pulls level.
I used cut 1x4s and glued the pieces together to make the initial cube shape that I would cut down with my bandsaw for this project. Now you can start cutting away the excess, the nice part about a bandsaw box is that you have room to make mistakes because everything is going to get cleaned up when you sand it! Now you just want to cut the back of the box off as straight as you can.
Once you’ve achieved a nice smooth texture, finish your bandsaw box with your favorite topcoat, laquer or stain. Kyle’s bandsaw box was crying out for some small knobs to finish off the drawers. That’s one of the best parts about creating your own bandsaw box.
STEP TWENTY-ONE. After sanding the final shape of the bandsaw box, place the drawers inside the box and notice that they are sunken in. STEP TWENTY-THREE. The next step is to round over the front and back edges of the bandsaw box including the drawer openings and the fronts of the drawers. Make sure to wax inside the bandsaw box openings where the drawers go into so the glide when you open and close the drawers.
how to cut a bandsaw box Related Question:
How deep should a bandsaw box be?
Step 1: Bandsaw Box Blank The depth can vary but I like mine to be about 4″ thick. In this example I’m using Baltic birch plywood as my core with an exotic wood on the faces. You’ll glue up all the pieces with wood glue on the faces of each piece. Use plenty of wood glue make sure the entire surface is covered.
What is a band saw box and how is it constructed?
Band saw boxes are boxes made out of wood using only a bandsaw for cutting them out. The wood may be a solid block, a laminated block or a log from the woodpile. Whereas most boxes have straight sides and square corners, band saw boxes have virtually no restrictions as to shape.
What is the difference between a band saw and a scroll saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.
How thick can a band saw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Are band saws useful?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.