Read on to learn how to tell if your circular saw blade is dull, and what you should do if it is. These blades are typically used for cutting through wood, but specially designed carbide blades can also cut through light-gauge metal. Although somewhat rare today, steel-tipped blades are made entirely of steel and were the most common variety of circular saw blades before carbide-tipped options.
If your saw blade has been cutting fine, and you have noticed no changes in how it cuts, then it’s likely that you’re still working with a sharp blade. Make sure you are wearing chemical resistant gloves when cleaning a saw blade using a commercial saw blade cleaner. Compare the saw blade to another similar blade that you know is sharp and in good working condition.
Whether you use your circular saw for work each day or on the weekends for personal creative projects, there comes a time when you’ll need to replace the blade. Increased kerf tearout, excessive burning, chipping and binding and slow and difficult push-through are common red flags that indicate you need to replace a circular saw blade. American-made LUXITE circular crosscut saw blades and rip cut saw blades stay sharper longer, reducing sharpening costs and eliminating the need for buying a replacement blade.
Given this, please assume that any links leading you to products or services are affiliate links that we will receive compensation from. There are millions of products and services on the web, and I only promote those products or services that I would use personally. Any product claim, statistic, quote or other representation about a product or service should be verified with the manufacturer, provider or party in question.
Although chipping of wood is one of the characteristic signs of a blunt saw blade needing replacement or sharpening, it can also be a sign of lumber or plywood in a bad position. Although a blunt blade is a major cause of slow spinning, using the wrong saw blade can also cause it to cut through slowly. Sometimes when cutting with a circular blade saw you may encounter hard surfaces that may break the teeth of the blade.
how to tell if your circular saw blade is dull Related Question:
How do I know if my saw blade is dull?
Look for worn-down, chipped, broken and missing teeth or chipped carbide tips that indicate it’s time to replace a circular saw blade. Check the wear line of carbide edges using a bright light and magnifying glass to determine if it’s beginning to dull.
How long should a circular saw blade last?
Circular saw blades can last anywhere from a few months to a decade or more, it really depends on the type of blade, what you cut with them, and how often you use the blade. There are two common blade types used for cutting wood: carbide-tipped and stainless steel.
Is it worth sharpening circular saw blades?
When your circular saw blade becomes dull, not only will it give you a rougher finish, but your saw’s motor will have to work harder and may burn out sooner. Sharpening your saw blades will save you money in the long run because you’ll get better cuts, and you’ll have to replace your saw and blades less often.
Why does my circular saw blade smoke?
A Dirty Skill Saw Blade Can Cause Smoke The same goes for your circular saw blade. When you use your saw repeatedly for an extended period, something called pitch can begin to coat the teeth of your blade. This pitch is rather sticky. As a result, it creates friction when cutting and possibly smoke.
What can I do with dull saw blades?
What Should I Do If My Circular Saw Blade Is Dull? Depending on the type of blade you’re using, you can clean, sharpen or replace it. More often than not, a dull carbide-tipped or steel-tipped blade is just dirty and needs to be cleaned. Simple remove it, soak it in an all-purpose cleaner and brush it clean.
How long do Diablo blades last?
That said, an average table saw blade will last about 2-4 years until it needs to be replaced. Sometimes, you don’t even have to replace your table saws blade… a simple cleaning and sharpening will do.
Can Diablo saw blades be sharpened?
To ensure your Diablo cutting tool continues its high performance standards, please contact one of our approved “Authorized Sharpening Service Centers”. Central Alabama Saw & Tool Co.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
Do diamond blades wear out?
That’s because a diamond blade cuts with the diamonds impregnated into its cutting segments. These diamonds wear down during cutting, despite being one of the hardest substances on earth. When these diamonds are worn out, then your diamond blade is worn out, and you’ll need to replace it [1].
Does cutting PVC dull saw blade?
The answer to this question is yes. If you are not careful while cutting PVC pipes, then your saw blade will get dull within a few cuts.
Why is my miter saw burning the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
What angle do you sharpen a circular saw blade?
Woodworkers and carpenters use a tried-and-true method to put a sharp edge on their blades when they get dull. You can do it, too, with a small file. It’s a simple procedure that matches the angle of the tooth — usually between 15 and 20 degrees — to the file.
Why did my circular saw stopped working?
Check that your supply power is not at fault. It could be a damaged power cord or tripped breaker rather than the saw at fault. You can check quickly for that by plugging into another outlet with different cords or breakers to see if the saw then works.
Can a circular saw cut a 2X4?
Yes, a 7-1/4 inch circular saw has plenty of blade depth to cut a 2X4. This blade size can even make quick and easy 45 degree angle bevel cuts through a 2X4.
Which way does a saw blade spin?
Like miter saws, table saw blades rotate clockwise, meaning the teeth should be pointing down.
