In order to determine bandsaw blade length for your saw, please reference our Bandsaw Blade Lengths & Manufacturers page for a list of common saws and sizes. If you cannot find your saw model or are unable to locate a manual, Detroit Band Saw can teach you how to determine bandsaw blade length. If you do not have an existing blade, there is a mathematical equation to help determine saw blade length in inches.
There are three different ways to measure the length of a bandsaw blade. Stand the blade hoop up on the strip of tape, and use a pen to mark a line on the inside of the blade and onto the tape. Roll the blade in a straight line for one rotation – until the mark on the inside of the blade hits the floor.
If you lost your bandsaw owner’s manual and don’t have a blade to measure from, or if you’ve added riser blocks, put this simple math formula to work to determine your tool’s blade length:Blade length = +. Key_A= distance in inches between bandsaw wheel centers when the upper wheel is midway in its adjustment rangeB= bandsaw wheel diameter.
“We don’t know what bandsaw blade length fits your bandsaw either, but fortunately it’s easy to find out. It’s especially easy, of course, if you have an old bandsaw blade that fits the saw-just measure its length. Make a mark on the inside of the blade, and align it with the zero point on a measuring tape laid on the floor. Roll the blade along the tape until the mark reaches bottom center again, and there’s your measurement. The exact measurement is just a target, by the way – if your bandsaw blade measures 114-5/8″, you don’t have to special-order that exact length. If you don’t have a blade to measure, or if you simply want to know if a 93″ blade will fit a saw rated to handle 92”, here’s how to determine the range of lengths you can expect to mount on your saw. Bandsaw Blade length listed in owner’s manuals is usually the average of these two figures, or a convenient whole number somewhere in the vicinity.
If you want a good blade for the task, check out the Olson Saw Hook Saw blade works well thanks to its easy to use and durable nature. You know how to calculate your band saw’s blade length, so we’ll look at how to get the width and depth measurements. Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure.
Band saw blades come in a variety of lengths, widths, thicknesses, and tooth configurations. In order to determine bandsaw blade length for your saw, please reference our Band saw Blade Wizard on any of the blade pages on sawblade.com. If your saw or model are not in the wizard, This video will teach you how to determine bandsaw blade length.
how to determine bandsaw blade length Related Question:
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
How long is a 14 bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What determines bandsaw size?
The Specs. A bandsaw is nominally sized by the diameter of its wheels. The throat width is then immediately recognizable as about 1″ less — that defines the widest board that can be passed between the blade and the column. The resaw capacity is the maximum height (thickness) that can be cut.
Can I use a longer bandsaw blade?
Try a blade of 114” or 115” length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2” difference between the shortest and longest blades that the saw can use.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What size blade does a 18 inch bandsaw take?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
What size blade does a 14 inch Craftsman band saw take?
99-3/4 inch Band saw Blades to fit 14 inch Sears Craftsman Bandsaw 922401.
How many TPI does a bandsaw blade need?
For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
How long should a metal bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How many teeth per inch should a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
How thick of wood can a 9 band saw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How long is Ryobi bandsaw blade?
The blade is 62” so remember that when you’re ordering blades.
What size blade does a Ryobi bandsaw take?
Band saw comes with 1/4 In. X 6T Blade, and Miter Gauge.
What is the difference between a band saw and a scroll saw?
Now, one of the really big differences is that the scroll saw’s blade moves up and down, whereas the band saw’s blade moves in a continuous downward motion. Band saws also differ in the thickness and size of materials which they can handle.