Chainsaw files are very important as they can help prolong the lifespan of your chainsaw chain. Not every chainsaw chain is created equal and choosing the right chainsaw file is paramount, as it needs to match your chain; choosing the wrong file will diminish the cutting performance from the chainsaw chain. To be absolutely sure what type of chainsaw file you need for your chain you should check your manufacturers manual.
To get a deeper understanding of why each chainsaw needs a special file, you need to have a basic understanding of the cutting component of the chain. To file it, you need a file that will fit the square shape of the cutting edge. A chisel cutter needs a file that can fit its square cutting edge.
This will prevent the saw from cutting so the depth gauges need to be lowered to the right height using a flat file and file guide. Place the file guide between the rivets on the chain ensuring that the arrows on the guide are pointing towards the front of the chain. Basically if these gauges come above the cutters, file them flush with a flat file.
You need to know how to make your selection of the chainsaw file sizes to get a file that will match the blades of your chain and keep them sharp. You simply need to locate this number and match it to the corresponding file size listed on the file chart. When it comes to sharpening the blades of the chain and keeping them sharp, you need several tools but one that can never miss is a file and by extension, you need to know how to choose the chainsaw file sizes.
how to determine chainsaw file size Related Question:
What size file do you use on a 3/8 chainsaw chain?
With that said, the Stihl 3/8″ chain is identical in size to Oregon and other brands which all recommend a 7/32″ file.
What is the correct file size for .325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
How do I know what pitch my chainsaw chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
How many different size chainsaw files are there?
Chainsaw File Size As we will see on the graph, the primary file options are 4.0 mm, 4.8 mm, and 5.5 mm. It comes in either a round file or flat file depending on the type of cutter you are planning to sharpen.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Will a 3/8 chain fit a .325 bar?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
What size file do I need for a Stihl 250?
Answer: My MS250 came with a . 325 chain which is a 3/16″ round file. You will need the sharpener for that one.
Does gauge matter on chainsaw chain?
The gauge measurement of a saw chain tells a pro user about the strength of a chain’s drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
What size file does a STIHL ms170 use?
STIHL chains and the file size is 5/32 in.
What kind of file do you use to sharpen a chainsaw?
While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening. There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32.
What does the pitch mean on a chainsaw chain?
Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.
What does the numbers on a chain saw chain mean?
0.050″ (1.3 mm) and 0.058″ (1.5 mm) are most common, 0.043″ (1.1 mm) and 0.063″ (1.6mm) less common. Pitch and gauge together determine the size of chain. Length is determined by counting the number of drive links, also called drive lugs. (see picture below).
Can I change the pitch on my chainsaw?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket.
What’s the difference between .050 and .058 chain?
Today there aren’t any difference between .