12-06-2010, 6:08 PM #1 What is the green, politically correct way to dispose of an old band saw blade. 12-06-2010, 9:19 PM #5 If someone is walking around the landfill, bandsaw blades are the least of their worries. 12-14-2010, 12:51 PM #9 The real green way is to turn tha old bandsaw blade into a file.
Good tip Eric, I don’t have any old B/S blades at the moment but something to remember when I do. “I read about cutting a fine toothed but wide blade to a good length, fastening down the ends flat to a board, and using the blade to cut sandpaper. Jut slip the paper under the blade and pull up sharply. Sounded like a good idea, but I’ve never done it. I always have broken blades around, but the 1/8” blades are useless for much of anything. Eric Noblesville, IN. the previous owner of my bandsaw had his own idea of dealing with snapped blades, he just left them in the machine! when i was tuning it i recovered several meters of blades that were just rolled around the axle, they made a noise but you couldn’t see them.
She spotted an old broken blade rolled up and laying by the shed, and asked if she could have it. She called me a couple of weeks later and asked if I had another broken blade I could send her, she had sold the first one to a friend for $25.00. Buy a blade for $25, run it till it gives out, knock the points off and decorate it a little, and sell it for $25. My sister just might be a genious.
Originally designed to protect glass bottles, a wine box is perfect for organizing shoes as well because it comes with cardboard dividers already in place! Garden Hose If you have old buckets with broken plastic handles, retrofit the buckets with new handles made from an old garden hose. The handles work great and keep those buckets on the job! Old Gloves Don’t throw out your old work gloves. Three-Ring Binder Spine To store elastic cords safely and neatly, pull out the spine of an old three-ring binder.
Jigsaw blades, circular saw blades, tile or metal saw blades, and hand saw blades are just a few examples. How to recycle saw blades Most curbside recycling programs do not accept scrap metal. How to reuse saw blades Many saw blades can be sharpened and used another time.
how to dispose of old bandsaw blades Related Question:
What can you do with old band saw blades?
There is life for those old, broken, and dull bandsaw blades. Just cut the old blade into sections about 12″ long. Stack the pieces together, alternating the teeth so that they don’t touch their neighbors. Use either same tape, or just braze the ends together,.
How do you dispose of a saw blade?
If that grip is made of untreated wood, you should be able to recycle it at your local recycling center. You will need to remove the grip from the saw blade first. After that, look for the wood recycling bin. If the handle is made of treated wood or plastic, you will need to throw the handle in the trash.
How long should bandsaw blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
Are bandsaw blades hardened?
So, in fact, the whole blade is hardened at the mill that produced the raw banding, not just the tips or teeth.
How long is a shopsmith bandsaw blade?
The Shopsmith Bandsaw accepts continuous- loop blades 72″ long and 1/16″-5/8″ wide. Shopsmith offers a variety of blades from 1/ 16″ wide to 5/8″ wide for cutting wood, plas- tics and nonferrous metals. To use a 1/16″ blade with the Bandsaw, you must install and use Cool Blocks (Part No.
Are old saw blades worth anything?
Old saw blades can be worth some money as scrap material but not a ton. If you have an old saw blade and would like to find out how much it is worth, contact your nearest scrap yard, scrap metal dealer, scrap buyer or recycling center for more information.
Can saws be recycled?
Can I recycle drills, sanders and saws? Yes. If it has a plug, battery or cable it can be recycled and made into useful items such as life-saving equipment, even new tools.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
Can you sharpen a bandsaw blade?
If you’re looking to sharpen your band saw blade, you have two options: manually sharpen the blade yourself or use a mechanical sharpening machine.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
What is TPI on a band saw blade?
The number of teeth per inch (TPI) is important in obtaining the finish desired and the proper feed rate. A coarse tooth blade (2, 3 TPI) should be used for resawing wood and cutting thicker stock up to 8″. A fine toothed blade (18 to 32 TPI) should be used for thinner metals and plastics under 1/4″.
Which way should the teeth face on a bandsaw?
The teeth on the bandsaw blade should face down so that the cutting action is from the top of the material to the bottom.
Does the shopsmith have a band saw?
As with all Shopsmith special purpose tools, your bandsaw offers a number of great features and accessories to help you make everything you make – better.
What size bandsaw blade fits a shopsmith?
1/4″ Combination Bandsaw Blade Standard with the Shopsmith Bandsaw. 3/4-inch minimum radius.
What is a shopsmith Mark V?
The Shopsmith MARK V gives you the five most needed workshop tools in just 12 square feet of space about what you d need to store a bicycle. With a Shopsmith MARK V, you get: A 34 inch Lathe for turning porch and stair railings, bed posts, chair spindles, bowls, table legs, gift boxes, vases, etc.