One thing I like about the $100 NT grinder: the grinder pivots are flexible enough that it’s easy, before each “Hit” with the wheel, to move the grinder assmbly a bit right or left. Put new wheel on grinder and increased the amount of material removed from the top plate as an experiment. The diamond wheel on my grinder that came with my Peterson had a white soft stone to clean it.
If you want to play around with it, by all means, but I don’t think you’re going to get the results of a proper square grinder. Most square grinders are either Silveys, or less commonly Simington’s. If you really want to square grind chain correctly, a proper square grinder is the way to go.
Since saw chains have cutters that alternate orientation along the chain, you need to use a chainsaw sharpener on all cutters on one side, then swivel the chain holder and tackle those pointing the other way. An electric chainsaw sharpener is ideal for this kind of periodic chain maintenance, though you will need to change the abrasive wheel to an extra-wide version made for this work. No matter how you use a chainsaw sharpener, it makes sense to keep an extra chain or two on hand, sharp and ready to go as you’re working in the forest.
how to dress chainsaw grinding wheel Related Question:
What do you use to dress a grinding wheel?
A grinding dresser or wheel dresser is a tool to dress (slightly trim) the surface of a grinding wheel.
How do I make my chainsaw chain more aggressive?
In general, if you want to have an aggressive cut, you are going to need a chainsaw chain that operates as quickly as possible. A chainsaw chain with full chisel teeth means that you are cutting with a very high speed. Speed being one of the main ingredients behind an aggressive chain, this is clearly vital.
What degree do I set my chainsaw sharpener?
Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it’s best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log.
What is a wheel dressing tool?
Wheel dressers and dressing tools are used to condition, true, and dress grinding wheels. Dressing is the process of re-sharpening the tiny cutting edges on a grinding wheel’s surface. Diamond tools and wheel dressers fracture the grinding wheel’s abrasive grains in order to produce sharp new edges.
Why truing and dressing are necessary in grinding wheel?
Truing creates a smooth surface on the wheel periphery, and with no exposed grit the wheel won’t cut. Dressing sharpens the wheel by removing bond material and fracturing the superabrasive grit to expose fresh edges, so dressing always follows truing.
How often should you dress a grinding wheel?
Dull dressing tools glaze the wheel face to produce a dull wheel. To maintain a well-defined and sharp diamond point, rotate the single-point or cone-point tool 1/8 turn at regular intervals. The frequency of these rotations will depend on how often you dress, but a minimum of once per day is a good rule of thumb.
What is dressing a grindstone?
Dressing returns the grinding wheel to its original sharpness by removing old grains to reveal the fresh grain underneath. It removes clogs, dulled abrasive grains, and excess bonding material to help minimize vibration, thereby improving surface finish.
Why do Loggers Run chainsaw bars upside down?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
What chainsaw chains do professional loggers use?
Full-chisel teeth chains are usually used by professionals on large saws. Semi-chisel teeth are rounded, so the risk of kickback is less, and they stay sharper longer. Semi-chisel teeth cut slower but are a better choice in dirty wood than full chisel.
What is the down angle on a chainsaw chain?
According to the chain’s manufacturer, the chain should be sharpened with a 10 degree down angle, but with a note that when sharpening with a hand file to use a 0 degree down angle.
What makes a chainsaw cut at an angle?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
How is truing done?
Truing is in fact done on glazed wheels. Wheel truing is defined as the act of restoring the cutting face of a grinding wheel by removing the abrasive material from the cutting face and sides of the wheel so that it will run true with respect to the axis of rotation and produce perfect round or flat work.