STOP! Take a real close look at the drive links, you will see that the drive link near the “Stuck” link has a few small burrs that are caused by the link hitting the chain catcher, or skipping over the drive clutch, This is common with a thrown chain. You may have to use a little force to get the link to move, a little force is ok. The chain should be able to be advanced through the guide bar with almost no effort, if it’d tight there are still burrs on drive links.
Chainsaws do not have a blade but a chain made up of lots of little teeth with sharpened blades on them, and few situations are as frustrating as dealing with a length of razor-sharp metal teeth that won’t behave as intended. There is a trick to untangling a new or old chainsaw chain that makes the process so simple that you’ll wonder why you didn’t think of it. Because chainsaw chains are stiff, the dangling, lowest part will poke straight out like a board until it reaches a vertical position.
Another option is popping out the bent links and replacing them if you have access to a chain breaker and spinner. If however you bent the drivers up in the chain it’s self it might not be a bad idea to just change them rather than take a chance of breaking a chain. I’ve taken some bends out with the chain off & just using my hands to bend the oposite of where it’s bent.
how to handle chainsaw kickback Related Question:
What causes a chainsaw to kick back when trying to start?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
How often does chainsaw kickback happen?
Kickback can happen in the blink of an eye too. In fact, about 30,000 chainsaw-related injuries happen each year, with chainsaw kickback accidents being the most common hazard.
What are the most common chainsaw injuries?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
How do I stop my chainsaw from binding?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
How can chainsaw accidents be prevented?
Sharpen the teeth and keep the chain lubricated and under proper tension for the best and safest cuts. Training, site preparation, safe work practices, and wearing the proper safety equipment can prevent chainsaw injuries and fatalities. You, the chainsaw operator, can control these factors before each and every cut.
How common are chainsaw accidents?
They can also quickly cause severe injury or death. According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually. Medical costs for chainsaw injuries based on these facts amount to about 350 million dollars per year.
Where do most chainsaw injuries occur?
Approximately 40 percent of all chainsaw accidents occur to the legs and well over 35 percent occur to the left hand and wrist.
How could you best identify a kickback scheme?
Detection of Bribery and Kickback Schemes Compare prices paid for goods and services to market rates. Analyze purchase levels by vendor. Analyze inventory overstocks and shortages. Identify continued purchases of inferior-quality goods.
What are anti kickback pawls?
Anti-kickback pawls are saw attachments that reduce kickback while operating a saw. They reduce the risks of injury and equipment damage. They can be installed on table and radial arm saws.
Does riving knife prevent kickback?
If you get board with some funky grain or a knot it could easily still bind up on the blade and kickback even with a riving knife. A riving knife is a great feature and will prevent most kickbacks, but you still need to use proper technique and not stand directly behind the blade because it can still happen.
How do you get a chainsaw unstuck from a tree?
The best way to free a trapped chainsaw is to use a felling wedge or a crowbar to gently lift the pressure and tension of the tree off of your chain and bar. Before attempting to do this the engine should be turned off to prevent the chain from accidentally moving and causing damage or injury.
Can you cut with the top of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
Can you cut sideways with a chainsaw?
While a properly working chain saw helps you cut hours off your work time when felling trees or cutting logs for firewood, it can also be a dangerous tool when things go wrong. When a chain saw cuts sideways, it’s a clear indication that things aren’t as they should be.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over. Enter the WORX JawSaw.