Chainsaws do not have a blade but a chain made up of lots of little teeth with sharpened blades on them, and few situations are as frustrating as dealing with a length of razor-sharp metal teeth that won’t behave as intended. There is a trick to untangling a new or old chainsaw chain that makes the process so simple that you’ll wonder why you didn’t think of it. Because chainsaw chains are stiff, the dangling, lowest part will poke straight out like a board until it reaches a vertical position.
No matter how snarled a chainsaw chain is, you can still untangle it using a simple repeated method. Proper care of a chainsaw and chain will give your chainsaw a longer and more productive life! The easiest way to care for your chainsaw chain is to make sure it’s clean, well-oiled, and the teeth are sharpened.
To survive the situation without postponing the work or destroying the chainsaw, you must learn how to untangle the chainsaw chain. Well, if the chain is still locked up in the chainsaw blade, then you need tools to remove the chain from the chainsaw. If it’s jammed in the chainsaw: Use the tools that suit your chainsaw and open your gasoline or electric chainsaw to get the chain off the chainsaw.
These could aid with taking the chain or chainsaw housing off. Continue to hold loops in your hands, and then raise the absolute lowest part of the chain. As a result, it will slide right past the loops, causing the chain to untangle.
how to get chainsaw chain untangled Related Question:
Is there a master link in a chainsaw chain?
Locate the master link that most manufacturers install to make removal of the chain a simple process. A visual inspection of the chain will reveal the master link due to its appearance that makes it stand out slightly from the other links.
What dulls a chainsaw chain?
You’ve seen that certain jobs can make chainsaw blades dull faster. Sawing through a lot of wood or sawing through dirty wood will be rough on a blade. It might be that you just need to get used to sharpening the blade more often. Chainsaw blades need to be sharpened regularly so that they can be used properly.
Why is my chainsaw chain not spinning?
The chain tension may be too tight. Easy fix, just loosen the bar-retaining nuts and rotate the tensioning screw counterclockwise to the correct tension. Then tighten the nuts back up.
Why does my chainsaw keep jamming?
Here are our explanations! Indeed, whether it is a chainsaw electric ou thermal, it is the teeth of its links that come into direct contact with the wood and the materials to be cut. As a result, dirt, wear on the guide or links and even the motor can be the cause of jamming.
How do I keep my chainsaw from binding?
Cross-cutting logs that are supported at both ends Begin by making a cut on the top of the log that is an inch or two deep. This will help prevent the log from splitting. Next, directly beneath where you made this cut you can use your chainsaw to cut from the underside of the log and work up until you meet the top cut.
Why does my chainsaw chain stretch so fast?
Why Does My Chainsaw Chain Get Loose So Fast? One of the most common reasons why the chainsaw chain gets loose so fast is because of wear off caused by time and usage. If you are using an old chainsaw, you will notice that the chain gets loose very frequently thanks to wear on both the chain and the sprockets.
What is a chainsaw chain drive link?
Gauge Measurement The parts of chainsaw chains that fit into the saw’s guide bar are called the drive links. The drive link is the bottom part of the chainsaw chain (see picture below). Gauge measures the thickness of the drive links if you were to look at them along the length of the chain.
Is Echo as good as Stihl?
Conclusion. Echo and Stihl are both options. If you want a powerful and lightweight chainsaw, then an Echo model might be the right choice for you. Stihl makes more sense if you are after a well-built, durable, full of extra features, fuel-efficient chainsaw.
Can I use a Husqvarna chain on a Poulan?
The older Poulan bar slot is for larger bar studs which will fit on the smaller Husqvarna 435. Just needs a homemade wire adapter to snug it up. Poulan bar may oil through its adjuster hole, if not easy to drill a new hole. Only thing to worry about is chain pitch size and drive link gauge thickness.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How much slack should a chainsaw chain have?
The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it. The chain should snap directly into position.
Which way does a chainsaw spin?
Chainsaw chains rotate in a clockwise direction, so the cutting edges should be facing away from the engine and to the right, on the top of the chain.
How long should a chainsaw chain stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Why did my chainsaw blade stop spinning?
If the chain is too tight, the blade may not spin when the throttle is engaged, which can cause damage to the clutch or other associated parts. Keep in mind that the tension of the chain will change with heat. As the chainsaw is used and the chain heats up, it will become loose.
How do you know if your chainsaw clutch is bad?
Does the engine loose revs, or the engine keep revving and just the chain stops? If the engine is still running at normal revs, and the chain slows down, then it’s a problem with the clutch. Worn out, gummed up, jammed springs etc. If the engine looses revs under load then it’s more likely a fuel or carb problem.