I already downloaded those, but was hoping someone had the version that matched my pump exactly. My guess is the pump was the same for many years and somewhere between the 80’s and today it was redesigned. It used to be easy to find old information on the internet, but these days all that seem to exist is form companies selling the current version.
Hi. If anyone has information about pump pictured here as per mfg and model I’d appreciate it. Once you showed a pic of a model number starting with TF it’s a for sure. There have been several different TF models over the years and are still in production.
Don’t mix up the valves, just this last Sunday I went through the valves on an old 10 H.P. three phase Quincy that hadn’t worked right for years. Somebody had stuck the valves in the wrong holes and nobody could figure out why it took an hour to pump up. They thought the valves wouldn’t interchange between holes, I ran my fingers through the ports and used a screwdriver to figure out which way the valves worked and got it to pumping a 50 PSI rise a minute.
06-05-2020, 10:20 PM #6. 06-06-2020, 01:30 AM #7. 06-06-2020, 07:37 AM #8. That is a strange looking drain opposite the pulley side. 06-06-2020, 07:47 AM #12 Best thing for an people to help would be to get picks of any casting numbers or any type of identification markings. 06-06-2020, 09:44 AM #15. 06-06-2020, 10:27 AM #16 The champion pump is similar, but doesn’t look the same in a lot of aspects.
The largest advantage to using air compressors is that tools can plug into compressors for power rather than rely on its own motor, which increases wear and tear over the life of that tool. There also are air compressor users who appreciate not just the workmanship in vintage air compressors but the fact that many of them still work. Many antique tool collectors and experienced mechanics are able to identify vintage tools, including air compressors.
There were many pages of air compressor information that used to linked from the right hand column, and that column was getting mighty long. In order to make finding information on fix-my-compressor.com a little easier I’ve taken all those pages and listed them below by subject titles, trying to categorize them for you to find the air compressor information you are looking for more convenient. This page offers a broad range of information about compressors in general.
You’ll even recognize problems are developing with the pump even sooner if your compressor runs and runs, but does not ever get the tank pressure up high enough to shut the compressor down when the tank is full. If you feel air wafting or blowing out of the intake hole while the compressor is running, that’s a good indicator that the intake valve is compromised and it will mean it is time to disassemble the pump to replace whatever valve configuration that particular pump has. Some do so start you search by googling valve for xxxx compressor pump, where the xxxx is the make AND model of your air compressor.
how to identify air compressor pump Related Question:
Are old air compressors worth anything?
If you purchased or have a reliable back up compressor then sell the old compressor on any social or online auctions like craigslist for local listings or ebay for online auctions. A good rule of thumb would be $100 per 1 hp for good condition or $125 per 1 hp for great condition.
What are the main parts of air compressor?
The basic components of the air compressor are the electric motor, pump, and receiver. The receivers can be vertical or horizontal and have different size and capacity.
Where do I find the model number on a Craftsman air compressor?
(3) The Manufacturers Number (ASME Code Compressors only) is located on the metal data plate which is welded onto the backside of the air tank. (This data plate is painted the same color as the tank.)
How do you check a compressor serial number?
The serial number stamped or printed on the compressor nameplate consists of eight or nine characters. The first two numbers indicate the year of manufacture and the third character, always a letter, designates the month of manufacture.
Are old air compressors better than new ones?
You’ll get the most value from a new unit, thanks to its longer life span and quality components. A new air compressor is cost-effective because it will have better energy efficiency, and you likely won’t need to replace or repair components right away.
What can I do with an old compressor?
Salvage the old compressor for scrap. Many clients will separate the metals for better scrap value; steel, copper (electric motor), iron (pump), etc. Reuse the receiver/tank as additional air storage.
What is compressor head?
The compressor head is one of the vital components of your compressor. In conjunction with the compressor’s motor, it is the enginethat drives the entire mechanism. When it comes to the repair of this key piece, only trust high-quality products and experienced technicians, like the ones at Compressed Air Systems.
What are the two components of compressor?
A compressor features two major components and these are the power source and a compressing mechanism (for example piston and vanes). What’s more, these machines are similar to gas pumps because they transport compressed gas through pipes.
How many types of compressors are there?
There are two basic types of air compressors: Positive displacement, and. Dynamic.
What kind of oil does air compressors use?
The Clear Choice for Lubricated Compressors In general, manufacturers today recommend using either a 20 or 30 weight synthetic lubricant — rather than a mineral oil — to get the best results out of your industrial compressed air system.
Where is the model number on a compressor?
The model number is generally a number stamped into metal or on a sticker directly on your product. Regardless of your Air Compressor, the model number will be in one of 3 locations.
Where is the part number on a compressor?
The part number is usually found on the side of the air con compressor pump but you may also have a part number on the clutch.
What is a 2 stage air compressor?
In a single stage compressor, the air is compressed once; in a two stage compressor, the air is compressed twice for double the pressure. By increasing the number of cylinder stages and pressure, these machines work more effectively with a faster recovery time, and can handle more tools at once.
How do I know if my compressor valve is bad?
The low-side gauge should read at least a 20-inch vacuum within a minute or so. If the gauge cannot read at least a 20-inch vacuum, then the compressor’s suction valves are leaking, which means they are not fully closing shut. The compressor’s discharge valves can also be checked to see if they are leaking.”
What compressor does vintage air use?
The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range.
