Normal wear can make it difficult to accurately measure chain gauge on a worn chain. “Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest. Saw chain sequences include: standard, semi-skip, and skip.
We supply Oregon chains so if your chain is a different make please refer to our conversion chart below for the equivalent Oregon number. Click on the chain number below to take you to the correct chain page and then enter your link count using the drop down. Once you have this information use the chart below to identify your chain type and follow the link to the chain page.
how to identify chainsaw chain Related Question:
What do numbers on chainsaw chain mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
Are chainsaw chains marked?
Saw chain and guide bars both have identification marks on them, and unless they are extremely worn out, they explain what pitch and gauge of chain is on your saw. Look for any numbers and letters on the drive links. That will often tell you what pitch and gauge you’re running.
How do I know what size chain to buy?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
What is a 420 chain?
– All PEER roller chains incorporate solid rollers enhancing rotation on the. bushing while reducing impact loads on the sprocket tooth during operation. – All chain components are heat treated to achieve maximum strength. and greater wear resistance.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Does the number of links in a chainsaw chain matter?
Number of links is to fit the bar – pitch is to fit the sprocket. Show activity on this post. Since the number of links is larger(81 instead of 74), there is low chance that it would fit properly.
Are all 14 inch chainsaw chains the same?
The size of a chain saw’s chain does not always correspond to the size of the guide bar. Determining the correct size of chain for a chain saw with a 14-inch guide bar involves several factors, including the size of the drive lugs and their distance from each other along the chain.
What does pitch and gauge mean on a chainsaw chain?
Pitch and gauge of the chain. * Pitch is the distance measured on center of any three rivets in a row. This distance will most commonly be 1/4″ . 325″ or 3/8″. * Gauge is the width of the groove in the bar that the chain rides in.
How do you measure a chain?
To measure, wrap a soft tape measure around your neck, keeping the tape measure parallel to the floor as you measure. Then, add 2 to 4 inches (5 to 10 cm) to your neck measurement to calculate your minimum recommended chain length.
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
What are the numbers on a Stihl chain?
The Stihl chainsaw scale Each model number contains three sections: MS, MSA, or MSE + numbers + letters. Let’s start with MS, a straightforward one to explain. MS stands for Motorsäge (chainsaw in German), and MSA means it is a battery chainsaw, while MSE indicates it is an electric chainsaw.
How big is a 16 inch chain?
16″: A 16″ necklace hits just above the collarbone and fits like a choker. This is the ideal length for petite frames and is one of the most common women’s necklace lengths.
Is 20 inch chain too short?
If you have an 18-inch neck size, then an 18-inch chain is not going to fit. However, if you want the look of a short chain necklace a 20-22 inch would be about right.
What is a 520 chain?
(3) The size of a chain is designated by a three-digit number (520, for example). The distance from the center of one pin to the center of the next is called pitch. Pitch is represented by the first digit, which is 4, 5 or 6.
What is a #25 chain?
#25 roller chain is a 1/4″ pitch ANSI Standard roller chain designed for light-duty or space confined applications. It’s the smallest size roller chain on the ANSI spectrum of roller chains but offers ample performance, strength, and durability for its small form factor.