We supply Oregon chains so if your chain is a different make please refer to our conversion chart below for the equivalent Oregon number. Click on the chain number below to take you to the correct chain page and then enter your link count using the drop down. Once you have this information use the chart below to identify your chain type and follow the link to the chain page.
how to identify oregon chainsaw chain Related Question:
What chainsaw chain numbers mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
How do you read a chain in Oregon?
Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Does the number of links in a chainsaw chain matter?
Number of links is to fit the bar – pitch is to fit the sprocket. Show activity on this post. Since the number of links is larger(81 instead of 74), there is low chance that it would fit properly.
What is a 420 chain?
– All PEER roller chains incorporate solid rollers enhancing rotation on the. bushing while reducing impact loads on the sprocket tooth during operation. – All chain components are heat treated to achieve maximum strength. and greater wear resistance.
How do I know what size chain to buy?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
How is chain pitch measured?
Measuring the pitch begins by identifying the pin of your chain. Pitch is the measurement from the center of one pin to the center of the next pin in line. The pitch helps determine the overall rated weight and strength of the roller chain.
What is low profile chainsaw chain?
Low profile or “lo pro” chain uses cutters that aren’t as tall as the cutters on standard chainsaw chain. This means that low profile chain makes a shallow cut. The advantage of using low profile chain is that it weighs less than standard chain, which makes it a good fit for low-horsepower saws and electric saws.
What is chain pitch?
In terms of conveyor chain, pitch is usually defined as the distance between links, as measured from the center of the roller pin on one link to the center of the roller pin on the next link. Note that some precision link conveyors refer to the pitch as the link size.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
What is the correct file size for 325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
How do I identify my Husqvarna chain?
The model number of a Husqvarna chainsaw is printed on the side of the recoil assembly on the unit(eg. 455, 460, 372 XP). Husqvarna chainsaws also have a small metal plate stamped with the model number, part number, and serial number. The plate is typically located in one of four locations.
What does pitch and gauge mean on a chainsaw chain?
Pitch and gauge of the chain. * Pitch is the distance measured on center of any three rivets in a row. This distance will most commonly be 1/4″ . 325″ or 3/8″. * Gauge is the width of the groove in the bar that the chain rides in.