“The slot for a #0 biscuit measures about 21⁄8” wide, so you can’t hide a biscuit joint in stock narrower than this. Even a well-tuned biscuit joiner can sometimes cut slots that result in a non-flush-fitting joint. Cutting the spline slots on your tablesaw requires a tall jig, but you can cut them easily and quickly with your biscuit joiner and the attached fence jig, see drawing below.
Because biscuit joints are easy to mark out and quick to cut, using one almost seems like cheating. The safest way to cut biscuit slots is with a biscuit joiner. The oversized slot lets the biscuit move slightly, enabling you to tweak parts into perfect alignment.
setting up a biscuit joiner Related Question:
Are biscuit joiners worth it?
Biscuits joints serve best as a quick and easy way to keep glue-up parts in alignment, and that they add appreciable pull-apart to strength joints that would be otherwise too weak to stand on their own – like butt joints and miter joints.
Where do you place a biscuit joint?
Biscuit Spacing The plate joints should be positioned so that the edge of the biscuit is two to three inches from the edge of the wood stock.
What is the difference between a plate joiner and biscuit joiner?
A plate joiner is the same as a biscuit joiner and are used to create an oblong hole in two matching pieces of wood. After the joiners have created the hole, a biscuit is glued, inserted and typically clamped until the wood is dried.
What are the disadvantages of a biscuit joint?
Biscuit joints do not stand up well against other joinery methods. We won’t spend any time comparing with mortise and tenon joints because all other joinery methods pale in comparison when measuring strength. But, as an example, the use of dowels as opposed to biscuits is a step up in strength.
Can a router be used as a biscuit joiner?
If you want to make biscuit joints, you don’t have to buy a biscuit joiner. In most cases, a router equipped with a 5/32-in. slot bit can cut perfect slots to fit the biscuits. Mark the biscuit positions on both adjoining boards as you would with a biscuit joiner.
Do biscuit joints add strength?
Some folks (including me) may use biscuits for alignment or “reinforcement”, but the truth is they do very little to strengthen the joint. In this long-grain situation, its really the glue that’s doing all the work. As you have heard me and others say many times, the glue joint is stronger than the wood itself.
How do I know what size biscuits to use?
What Size Biscuit to Use. As a general rule, try to use the largest size biscuit possible, as this will provide the greatest amount of strength to the joint. In most cases, use #20 biscuits, but when working on narrower material, switch to smaller biscuits where appropriate.
How many biscuits should I use to join wood?
Two biscuits per foot is a great rule of thumb, but the goal is just to make the alignment task easier. So, if you have a couple of edges that are 24″ in length and are dead straight & perhaps you would only need two biscuits to do the job.