This would be a fun DIY challenge for you, and you get a good, functional bandsaw fence at the end of it all. This band saw fence was made for barely $15! This band saw fence helps you to rip better, resaw and do a bunch of other important construction work with your bandsaw. This is another video tutorial that gives you a thorough explanation of how to construct your bandsaw fence. The written tutorial is divided into clear steps with specific points that show you how to recreate a similar band saw fence accurately. It would be pretty easy to make yourself a bandsaw fence with the instructions in the guide. The tutorial also comes with a few tips and tricks for your bandsaw fence to make it better. You would need to make notes as you go through the tutorial because there are some important points he makes regarding the design within the tutorial.
2×4″ extrusion 1×2″ extrusion 1×1″ extrusion 2×2″ corner brace 4″ linear bearing to fit 1010 extrusion 1-7/8″ linear bearing to fit 1010 extrusion 1/4-20 fixturing knob + 1/4-20 carriage bolt + 1″ spacer Linear bearing brake + bolt 1/4-20 specialty nuts & bolts Shim Stock………. If you order 80/20® stock off of Ebay, you don’t necessarily get the lengths you want. Align the holes in the extrusions with the screw heads and snug down the screws. Position the extrusions and braces then firm up two screws on each brace and check for square.
A good fence can make your band saw one of the most useful machines in your shop. This fence can be made in a weekend for around $20, and it will do a great job on your band saw. You can adapt this fence to any band saw, but the dimensions given here are for my 14″ Delta.
By: John Doyle Resawing and ripping at the band saw has one set back – drift. To correct for blade drift, the angle of the band saw fence shown here can be adjusted. Slide the fence over the rails and tighten the clamps.
how to make a bandsaw fence Related Question:
Do you need a fence for a bandsaw?
If you use your bandsaw only for making curved cuts, you’ll likely never need a rip fence. For accurate ripping and resawing, though, a good fence helps greatly. That said, many bandsaws don’t come with a fence. Those saws that do have fences, particularly on lower-cost models, often don’t work that well.
What is a resaw fence for bandsaw?
Re-sawing allows you to create wide panels from narrow boards, thin pliable pieces for bent laminations, thin sheets of veneer, and even turn logs into lumber.