Make this simple circular saw jig and every cut will be perfectly straight! Just clamp the jig to your board and slide the circular saw along the fence. Be sure to keep the saw flat on the circular saw jig and slide it slowly along the edge. Of course, a table saw would make this cut in a fraction of the time it takes to set up this circular saw jig.
A circular saw is perfect for slicing up plywood and other sheet goods so they’re safer to maneuver over a table saw. Unless you use a circular saw every day trying to eyeball a straight cut across a sheet of plywood is like steering a boat without a rudder. Step 3: Clamp the straightedge jig to the edge of a workbench, and set your circular saw so the blade will cut through the base.
To make identical width rip cuts on a circular saw:Cut a 1×2 board 3″ to 4″ longer than the baseplate on your circular saw. To make wider rip cuts on a circular saw:Cut a piece of 1/2″ plywood to the size needed for the base of the jig. VIDEO TRANSCRIPTDanny Lipford: One problem many homeowners have when using a circular saw, is how to make good, long, straight cuts.
Here are our favorite 9 circular saw jig plans we found while scouring the web. This plan is a very useful resource – and as you can see, the result is very professional looking – it would probably work best with a corded circular saw rather than a cordless circular saw or a mini circular saw. Although a circular saw with a jig can’t replace a good table saw or miter saw for all applications, it can open up a whole range of new possibilities.
how to make a circular saw rip jig Related Question:
Can a circular saw rip?
Getting accurate crosscuts and ripping cuts with a circular saw are fairly easy tasks if you take your time, cut at slow speeds and use a guide. This guide highlights the procedures for operating the circular saw to get straight crosscuts and ripping cuts, along with instructions on how to make a ripping cutoff jig.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
What is the best saw to make a rip cut?
But when it comes to making a length-wise rip cut in wood, a table saw is the only tool that can do it accurately while producing cuts that look like factory edges. A table saw is the best tool to use when rip-cutting, but safe cutting requires that you carefully follow recommended procedures.
Can you rip a 2×4 with circular saw?
The best blade for ripping wood (or 2×4) using a circular saw would be a high-quality thin kerf blade like this-Thin Kerf Rip Blade. There are specific blades for some types of lumber. For e.g., it’s ideal to use a blade designed to rip pressure-treated lumber if you are ripping pressure-treated wood.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
Does Kreg rip cut work with any circular saw?
The Kreg Rip-Cut is designed to work with standard full size 7 1/4″ corded circular saws.
What makes a circular saw kickback?
Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood.
Why does my circular saw kickback at the end of a cut?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback. Never set a blade deeper than is required to cut the work piece 1/8 in. to 1/4 in.
Why does my jig saw not cut straight?
Your jigsaw may not be cutting straight because it’s outdated, lacking guide bearings necessary for straight cuts. Components such as blade clamps and guide bearings can also get damaged or worn. It’s also possible that human error is to blame, and you need a better straight edge or technique.
Can a jigsaw cut a 2×4?
Want To Share This? A jigsaw is a precision tool with a thin blade, which makes them ideal at cutting intricate designs on thin material. If you ever had to cut a 2×4 piece of framing lumber with a jigsaw and thought to yourself “there’s no way”, you might be surprised!
How do you make a perfect cut with a jigsaw?
The trick is to steer the saw along a clamped-down straightedge guide. The guide could be steel square, a long level, a rip of plywood, or perfectly straight wood board. As you feed the blade into the cut, place one hand on the edge of the saw’s base plate, and press in toward the straightedge guide.
What table saw blade is best for ripping?
Ripping solid wood: Use a 24-tooth to 30-tooth blade. You can use 40-tooth to 50-tooth multipurpose blade as well, but it will take longer. Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well.
What is a rip fence for circular saw?
The basic idea of the rip fence is a guide that attaches to the base of your saw and allows you to cut at a fixed distance from the edge of your board.
Can a 5 1/2 inch circular saw cut a 2×4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
What can I use instead of a sawhorse?
Substitute sawhorses with a stepladder | Wood.
