A circular saw is perfect for slicing up plywood and other sheet goods so they’re safer to maneuver over a table saw. The first time you try to heave a 100-pound sheet of MDF up and onto your saw, you’ll see just how valuable a little circ saw can be. Unless you use a circular saw every day trying to eyeball a straight cut across a sheet of plywood is like steering a boat without a rudder. The fence backs up your saw base and keeps the blade tracking straight through the cut. Make your fence a couple of inches wider than the distance your circular saw motor overhangs its base. Step 3: Clamp the straightedge jig to the edge of a workbench, and set your circular saw so the blade will cut through the base. Step 3: Trim the overhanging end of the stop to the correct offset for your circular saw.
Make this simple circular saw jig and every cut will be perfectly straight! Just clamp the jig to your board and slide the circular saw along the fence. Be sure to keep the saw flat on the circular saw jig and slide it slowly along the edge. Of course, a table saw would make this cut in a fraction of the time it takes to set up this circular saw jig.
Learn how to use your circular saw to make laser-accurate straight cuts! Here are four sure-fire ways to cut precise straight lines on boards and plywood! Breaking down sheets of plywood or MDF. Tips for Cutting Straight with a Circular Saw Position the speed square, DIY circular saw cutting guide, or Kreg Accu-Cut so it covers the side of the workpiece you want to keep. There are four ways to make straight cuts with a circular saw.
how to make a straight cut jig for circular saw Related Question:
How do you use a straight edge with a circular saw?
Slide the saw’s shoe against the circular saw rip guide to rip the plywood. To ensure a straight cut, press the saw firmly against the straightedge as you push it along. Clamp a perfectly straight board or metal straightedge to a sheet of plywood to make cabinet-quality straight cuts.
What tool is used to cut a perfectly straight line with a circular saw?
The Kreg Rip-Cut is an easy way for us to cut straight lines with our circular saw. The universal Rip-Cut sled attaches to most popular circular saws. The Rip-Cut fence follows the straight edge of our workpiece which ensures an accurate cut every time. The fence is adjustable and can make cuts up to 24″ wide.
Can I turn my circular saw into a track saw?
There has been a lot of buzz about Track Saws with both DeWalt, and Makita finally coming out with versions for the USA. But I bet many people don’t know that you can turn just about any circular saw into a track saw for a fraction of the cost of a complete track saw package all with a kit from EurekaZone.
Why is my circular saw not cutting straight?
What Causes a Circular Saw to Not Cut Straight. A faulty circular saw is likely to have issues such as an unstable blade or a warped blade edge. The problem could also be the way you operate the saw. If you do not operate the circular saw properly, it will not cut straight.
What can I use for straight edge?
If there are no markings, it is simply a straight edge. A ruler can be used for measuring and marking straight lines. A straight edge will not help you measure, but most are built more durably than rulers, making them a superior tool for marking straight lines. In most cases, rulers can function as a straight edge.
How do you cut straight with a table saw?
This essential table saw accessory is notched to hook solidly over the end of the board. You can then push it on through and hold it down firmly at the same time. It allows you to complete a perfectly straight cut while keeping your hands well away from the blade. It’s best to keep at least these two styles handy.
Can a circular saw make miter cuts?
When extreme precision isn’t required, you can cut 45-degree miters using a portable circular saw and speed square. 7. Hold the square against the board, then guide the saw along the square to make the cut.
Can you use a DeWalt circular saw on a track?
The DWS5022 is a reversible 1.5 metre track for use with the DWS520 plunge saws, as well as other DeWalt circular saws and routers. It features a support rail which runs up the middle and distributes weight effectively to deliver an accurate cut.
Do all circular saw blades Universal?
Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices.
How do you cut a plywood with a circular saw without splintering?
To do so, place the best side (meaning the side of the door that will be most visible once it’s hung) face down. Then score along the edge of the cut line with a sharp utility knife. Now when you make the cut, the wood fibers will break off cleanly at the scored line, leaving a smooth, splinter-free cut.
How many teeth do you need for plywood?
Cross-cutting wood or sawing plywood: Use a 40-tooth to 80-tooth blade.
