If your workpieces are unusually long or you want to make your wide belt sander part of a production line, your best option is a machine where you can raise the head to adjust height while the table remains at the constant height. The sander is smaller than the typical wide belt sander at only 24 inches in width. Once you identify and purchase the best wide belt sander for your application, staff need to be trained on how to use it correctly.
If you are doing cross grain you want the sharpest, softest scratch possible, so it will melt away in seconds with your hand sander, instead of taking minutes per door to grind the surface scratches away. If you sand with a 150 grit, you leave a scratch that only requires about. Some machines have the ability to turn the platen off, but it is only on bladder platen machines or machines set up for veneer.
how to make a wide belt sander Related Question:
Can you make your own belt sander?
Building a belt sander is a relatively simple project. You will need to gather some basic materials, such as a motor, pulleys, belts, and bearings.
What does a wide belt sander do?
The wide belt sander is used to machine stock flat and to specific thicknesses. It can be used with solid wood and composite boards such as plywood and MDF. A rubber conveyor carries your stock through the machine while a wide abrasive belt removes material from the top surface.