You need to use a lot to make bulk buying worth your while, especially with two saws that use different chain. I have never seen where you can save more than a few cents buying bulk chains vs buying premade loops. I own a Logosol and have bought dozens of chains and think the Baileys chains are excellent.
how to make my own chainsaw chains Related Question:
How many times sharpen chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
How are chainsaw chains manufactured?
A chainsaw, as you probably know, is a large gas-powered saw with a rotating blade in the form of a chain that continuously cycles down the length of the saw’s guide bar. Average chain links are made from a large press machine that stamps them out of sheets of stainless steel.
Do chainsaw chains have a master link?
Locate the master link that most manufacturers install to make removal of the chain a simple process. A visual inspection of the chain will reveal the master link due to its appearance that makes it stand out slightly from the other links.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What is the difference between R56 and S56 chainsaw chain?
The difference is the width of the chain track. S56 is . 050″ and R56 is . 043″.
What kind of steel are chainsaw chains made of?
The steel in most chainsaw bars is high-quality steel that will keep an edge well, but has enough flex to bend under stress rather than break or crack. The metal is generally corrosion resistant, and many bars are a stainless-steel alloy.
Where are Stihl bars made?
That product is the guide bar which are made by Oregon with Stihl colors and logo on it.
What metal are chainsaw chains made of?
The saw chain, or “cutting chain”, is a key component of a chainsaw. It consists of steel links held together by rivets, and superficially resembles the bicycle-style roller chain, although it is closer in design to a leaf chain.
Why does my chainsaw chain keep stretching?
A chainsaw chain stretches and loosens from tension and extreme friction. The friction from cutting through wood makes the chain very hot and the heat causes it to loosen. The heat expands the guide bar and when it cools, the chain has stretched. The chain will also loosen as it wears down from use.
Do chainsaw chains stretch over time?
Over time, the chain on your chainsaw will become loose, and new chains will stretch a lot more when you are breaking them in. You need to pay attention so that you can tighten a loose chain before you turn the chainsaw on, as loose chains are dangerous.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.