In order to determine bandsaw blade length for your saw, please reference our Bandsaw Blade Lengths & Manufacturers page for a list of common saws and sizes. If you cannot find your saw model or are unable to locate a manual, Detroit Band Saw can teach you how to determine bandsaw blade length. If you do not have an existing blade, there is a mathematical equation to help determine saw blade length in inches.
There are three different ways to measure the length of a bandsaw blade. Stand the blade hoop up on the strip of tape, and use a pen to mark a line on the inside of the blade and onto the tape. Roll the blade in a straight line for one rotation – until the mark on the inside of the blade hits the floor.
If you want a good blade for the task, check out the Olson Saw Hook Saw blade works well thanks to its easy to use and durable nature. You know how to calculate your band saw’s blade length, so we’ll look at how to get the width and depth measurements. Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure.
“We don’t know what bandsaw blade length fits your bandsaw either, but fortunately it’s easy to find out. It’s especially easy, of course, if you have an old bandsaw blade that fits the saw-just measure its length. Make a mark on the inside of the blade, and align it with the zero point on a measuring tape laid on the floor. Roll the blade along the tape until the mark reaches bottom center again, and there’s your measurement. The exact measurement is just a target, by the way – if your bandsaw blade measures 114-5/8″, you don’t have to special-order that exact length. If you don’t have a blade to measure, or if you simply want to know if a 93″ blade will fit a saw rated to handle 92”, here’s how to determine the range of lengths you can expect to mount on your saw. Bandsaw Blade length listed in owner’s manuals is usually the average of these two figures, or a convenient whole number somewhere in the vicinity.
If you lost your bandsaw owner’s manual and don’t have a blade to measure from, or if you’ve added riser blocks, put this simple math formula to work to determine your tool’s blade length:Blade length = +. Key_A= distance in inches between bandsaw wheel centers when the upper wheel is midway in its adjustment rangeB= bandsaw wheel diameter.
Band saw blades come in a variety of lengths, widths, thicknesses, and tooth configurations. In order to determine bandsaw blade length for your saw, please reference our Band saw Blade Wizard on any of the blade pages on sawblade.com. If your saw or model are not in the wizard, This video will teach you how to determine bandsaw blade length.
how to measure band saw blades Related Question:
How is a bandsaw blade measured?
Bandsaw blade width can determine how straight you can make a cut, how tight a curve (radius) or the shape you can achieve with your bandsaw. The blade width is measured from the tooth tip to the back edge of the blade, as per the example diagram.
How do I tell what size my band saw is?
Hold the blade steady so that the mark remains at the floor, and make a finishing mark there on another piece of tape. Measure the distance between the marks made on the two pieces of tape. That’s the length of your bandsaw blade!
How long is a 14 inch bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What does a 14 inch bandsaw mean?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
What is the most common bandsaw blade length?
Try a blade of 114″ or 115″ length; it’s more than likely that either one will work just fine. Most bandsaws will accept a range of blade lengths, sometimes with as much as 2″ difference between the shortest and longest blades that the saw can use.
What size blade does a 18 inch bandsaw take?
133 inch Band saw Blades to fit 18 Jet Bandsaw, 18 Craftsman.
What size blade do I need for a craftsman 12 inch band saw?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations. The blade width determines how tight a curve that can be cut.
What size blade does a 14 inch Craftsman band saw take?
99-3/4 inch Band saw Blades to fit 14 inch Sears Craftsman Bandsaw 922401.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
What is 14 TPI for cutting?
8-14 TPI blades are capable of cutting wood and the occasional nail. Demo blades fall into this category. 14-24 TPI is the range of metal cutting, PVC cutting and finish cut blades. The blades cut slowly, but leave being a very smooth edge.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
What size blade is on a 9 inch Ryobi band saw?
Sliding Miter Gauge. Includes 9 In. Band saw comes with 1/4 In. X 6T Blade, and Miter Gauge.
How long is blade on a Ryobi band saw?
The blade is 62” so remember that when you’re ordering blades.