It’s surprisingly easy to mill short, small logs into furniture-grade boards, right in your own workshop, all without special equipment. “I’ve had good results using two methods for milling lumber from small logs in my shop. The simplest involves a hydraulic wood splitter – the kind used to turn logs into firewood. Clear, straight-grained, easily-split species of wood are easy to cleave into board-like billets. Most firewood splitters handle blocks up to 24” long, so when you find a good log, cut blocks to this length, even if you’re making your firewood shorter. “Regardless of how you mill your micro lumber, drying involves the same process used with other kinds of rough lumber. No matter how long it’s been since your logs have been cut, the wood is still too wet for woodworking if those logs have not been sawn into boards. That’s why you need to promote air circulation on all sides of every board, and a household fan really speeds progress. Stack your lumber with 1/2”-thick strips of scrap lumber between each piece, then direct air flow over the pile.
There are a handful of techniques that woodworkers use for processing lumber with a bandsaw mill. You have to saw the log at opening face almost half path. So that’s some basic techniques and approaches to safely use a bandsaw mill for lumber production.
how to mill a log with a bandsaw Related Question:
What is the best way to mill a log?
Financially, grade sawing is the best sawing method for medium and high-quality logs, even though it may be difficult to turn a log on some mills and daily production volume may be lower. There are several reasons to consider quarter sawing because the grain patterns in some hardwoods are in great demand.
Can you rip boards with a band saw?
A band saw can shape curves, saw rough lumber safely, cut joinery, and even rip boards to width.
How thick of wood can a band saw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Is milling your own lumber worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
How much lumber can I get out of a log?
An average urban tree about 20 inches in diameter at 4½ feet above the ground and with a 10-foot solid log should yield 150 to 200 board feet of lumber.
Will a bandsaw cut 2×4?
your “small” tablesaw is one of the finest in the portable table saw category and should have no problems resawing a 2×4 although you may want to finish the cut with a jig saw by setting the blade slightly less than half the thickness of the 2×4.
Is a bandsaw better than a table saw?
Since the blade is so narrow and it cuts downward, it has the advantage of essentially keeping the workpiece solidly on the table as you make the cut. This makes the bandsaw inherently safer than a table saw for most cuts. Making a rip cut on the band saw is a breeze, with the right blade.
How much HP does a bandsaw need?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
How thick can a 9 inch bandsaw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
Can you mill dry logs?
Summary: Logs should be milled for drying as soon as possible, and the ends should be sealed as soon as they are felled. A bandsaw mill will create less waste than a chainsaw mill. Logs can be sawn for grade, quarter sawn, or flitch cut.