You can save time by properly preparing your logs before they go on the mill. Trim the bell of a butt log as close to the diameter of the rest of the log as you can. If you are cutting logs from the trees in someone’s yard, then grab your metal detector.
There are a handful of techniques that woodworkers use for processing lumber with a bandsaw mill. You have to saw the log at opening face almost half path. So that’s some basic techniques and approaches to safely use a bandsaw mill for lumber production.
Usually, lumber and logs that lie within a diameter range of 16 to 18 inches are able to be cut under a bandsaw mill. At this stage, we will take you through a 7 steps guide on how to cut lumber with a bandsaw mill. Once done with steps 1 and 2 of how to saw lumber with a bandsaw, it’s time to make the first cut on your lumber.
The height where I made my first measurement won’t change as I raise the small end of the log. I don’t own a bandsaw mill but I figure my opening cut is going to be not much different so…. “Log 12″SED flaring to 18”. The main reason I do the horns first is because many times the log turner will get under center of the log making turning a pain for me, I like to get what I call the trouble out of the way first, I have in mind what direction I am going, but the next two cuts will ultimately determine how I get there.
how to operate a bandsaw mill Related Question:
How does a lumber mill work?
A sawmill works by cutting logs into lumber using large bandsaw blades. The same process is repeated over and over, log by log, to produce high-volumes of rough cut lumber.
How do you get the most lumber out of a log?
Similar to cant sawing, plain sawing begins with rotating and sawing the outer sides of a log into boards until the center is squared into a four-sided cant. Instead of leaving the cant as is, it is rotated and sawn to produce the maximum amount of lumber.
How thick of wood can a band saw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
What are the three main ways to cut a log?
What many don’t know though is that there are three different method to cut wood to produce different results from the log and those are sawing, slicing, and using rotary.