Shipping a chainsaw may seem like a daunting task but knowing the simple steps in proper packing will take the difficulty out of the process. The key is to use a sturdy shipping box that can carry the weight of the chainsaw while providing protection from external impact. Fill the bottom with a layer of packing materials such as packing peanuts, crumpled newspaper or foam pads, and place the bar and chain on top in a diagonal position.
There is another option too, where you don’t even have to pack the chainsaw in a bag pack. A chainsaw mount, specifically designed for your comfort while carrying the chainsaw on a bike will definitely help you get rid of all hassles. By the way, scooter is a good option if you have to carry chainsaw mills and chainsaw together to a remote place.
how to pack chainsaw Related Question:
How do you store a chainsaw between use?
Your chain saw should be stored in a dry place. Choose a place which is well ventilated and protected from the weather. Keeping it outdoors is not advisable.
What should you not do with a chainsaw?
Don’t Cut With a Dull Blade Cutting with a sharp blade actually extends the life of your chain saw. That’s because a sharp blade pulls itself into the wood, while a dull blade requires lots of downward pressure. That pressure wears out the bar, drive links, clutch sprocket and clutch.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
Is it OK to hang my chainsaw?
Chainsaws can be stored vertically as long as precautions are taken to ensure the safety of the tool from damage from other items, dust, and fluids in your shed. It should be in an area where it will not get direct sunlight. The chainsaw is robust enough to be stored in the vertical orientation.
Should I store my chainsaw with fuel in it?
To store your chainsaw, do not run it out of gas for the winter. This allows the interior seals to dry (and possibly crack) and that is very bad for your saw.
How do you store a chainsaw so it doesn’t leak oil?
Store your larger chainsaws on the ground or a shelf, and hang the smaller ones on the wall to keep them from being lost. Before storing your chainsaws, always make sure that the oil reservoir is empty. If it’s not, ensure to drain the oil. Must secure the plugs after every use and before storage.
Can you cut dry wood with a chainsaw?
When it comes to actually cutting these wooden discs, your mind probably doesn’t immediately jump to a chainsaw as your tool of choice. But a chainsaw actually makes it easy to cut wood slices, especially if the raw material is a log, stump, or other large chunk of wood.
Can you cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Can you cut sideways with a chainsaw?
While a properly working chain saw helps you cut hours off your work time when felling trees or cutting logs for firewood, it can also be a dangerous tool when things go wrong. When a chain saw cuts sideways, it’s a clear indication that things aren’t as they should be.
Do you need to break in a chainsaw?
Typically we recommend a break in period of 6-10 tanks of fuel. During this period the engine should not be allowed to run at high RPMs for extended periods of time.
Can you cut with the top of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.
Do all chainsaws leak bar oil?
In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.
Can you put seafoam in a chainsaw?
At Sea Foam, we recommend overcoming saw starting issues by adding 2–4 ounces of Sea Foam Motor Treatment to a low tank of fuel, running it for about five minutes, then letting it sit a night or two to soak or clean. Add fresh fuel and proper two-stroke oil before operating and it’ll be good to go.
How long is chainsaw gas good for?
You must always use 89 Octane in your chainsaw. Always buy as little fuel as you can finish within 2 months. Ethanol-free and high-octane synthetic oil can be stored in the original container for up to 2 years.
Why is my Stihl chainsaw leaking chain oil?
This condition is deemed to be normal for any chainsaw with a similar bar & chain lubricating system. If the unit continues to seep oil after a few days, the problem may be the vacuum relief valve located in the side of the engine housing between the oil output hole and the bar stud(s).