‘Chainsaw kickback’ is a phrase that is used when discussing operating chainsaws. To ensure absolute safety, it is extremely important to ensure you’re well versed in what it means and how to handle it. To fully prepare for chainsaw kickback you first need to understand what it is, how it happens and how to avoid it.
Step 5: If you are using your saw for felling or crosscutting, boring the chainsaw bar into the trunk may be the best way to cut. Step 7: Pay attention to the nose of your chainsaw bar and how it is positioned. Step 9: Use narrow-nose bars, such as Oregon Double Guard bars, to ensure maximum kickback safety.
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback – the rapid upward motion ofh te guide bar that can occur when the saw chain, near the nose of the top area of the guide bar, contacts an object such as a log or branch, or the backwardm otion that can occur when the wood closes in and pinches hte saw chain in the cut. The most common and probably most violent kickback occurs when contact is made, either accidentally or intentionally, in this “Kickback zone.” In some cases the blade tip may move upward and back toward the operator who could suffer a very serious or fatal injury.
Below, we’ll explain chainsaw kickback as well as the kickback zone, causes of kickback, preventive measures, and how to avoid kickbacks in the first place altogether. Chainsaw chaps are preferable because they are chainsaw resistant and are also specially designed to protect the left side of your leg, which is another prime target for a kickback. There are many ways to avoid a potential chainsaw kickback.
The reason it has this name is that the chainsaw tip is the most common part of the chainsaw that can cause a kickback. If you’re cutting with a chainsaw and the wood closes around the chain tightly, it can cause a chainsaw kickback to occur. Chainsaw kickback is the most common type of chainsaw injury that people encouter.
how to prevent chainsaw kickback Related Question:
What causes a chainsaw to kickback?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
How can chainsaw accidents be prevented?
Sharpen the teeth and keep the chain lubricated and under proper tension for the best and safest cuts. Training, site preparation, safe work practices, and wearing the proper safety equipment can prevent chainsaw injuries and fatalities. You, the chainsaw operator, can control these factors before each and every cut.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Does riving knife prevent kickback?
If you get board with some funky grain or a knot it could easily still bind up on the blade and kickback even with a riving knife. A riving knife is a great feature and will prevent most kickbacks, but you still need to use proper technique and not stand directly behind the blade because it can still happen.
What are anti-kickback pawls?
Anti-kickback pawls are saw attachments that reduce kickback while operating a saw. They reduce the risks of injury and equipment damage. They can be installed on table and radial arm saws.
How could you best identify a kickback scheme?
Detection of Bribery and Kickback Schemes Compare prices paid for goods and services to market rates. Analyze purchase levels by vendor. Analyze inventory overstocks and shortages. Identify continued purchases of inferior-quality goods.
Where do most chainsaw injuries occur?
Approximately 40 percent of all chainsaw accidents occur to the legs and well over 35 percent occur to the left hand and wrist.
How common are chainsaw accidents?
They can also quickly cause severe injury or death. According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually. Medical costs for chainsaw injuries based on these facts amount to about 350 million dollars per year.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over. Enter the WORX JawSaw.
How long should chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Does a crosscut sled prevent kickback?
Another way to prevent kickback is by using a crosscut sled. These jigs keep your hands away from the blade and move the fence to the front of the blade instead of the side.
Do Anti kickback pawls work?
The farther back from the rear of the blade, the less effective it is. Anti-kickback pawls should be the backup to the preceding two options – if you can’t, or don’t (despite your best efforts) prevent the kickback, the pawls will at least retard the return of the stock in your direction.
When should you not use a riving knife?
When to Remove the Riving Knife But there are times when you simply must remove the riving knife, or when it is inappropriate to use one. A good example is when using a stacked dado blade to cut a dado or a rabbet. Because this type of blade does not create a through cut, a riving knife would serve no purpose.