In this article, we are going to show how to put a chain back on a chainsaw like a pro!!! Do not forget to grease the chain before you put it back on your chainsaw. Step 3 – Re-assign the Chain to its Bay Align the chain with the grooves of the bar while securing the chain around the sprocket.
Go through the rest of the article, where we will take you through steps on how to put a chain back on a chainsaw-. Now, once the chain is set in the right direction, set the chain around the sprocket. Once done, put the housing on the chainsaw chain again.
how to put chainsaw chain back on Related Question:
Is there a right way to put on a chainsaw chain?
The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. So the sharp edges of the blade should always face the clockwise direction. If you check from the top, you will notice that the sharp edges are facing the direction opposite the chainsaw body or motor.
What causes a chainsaw chain to come off the bar?
Chainsaw chains come off the bar due to worn-out bars, worn-out sprockets, and wrongly set tension. You should also note that with continued use, chains lose their tension and hence are more likely to come off the bar when you least expect it.
How do I know if my chainsaw chain is worn out?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Which way does a chainsaw chain go?
File the teeth from the inside towards the outside. The easy way to remember the correct direction is that the tip of the file should always point away from the engine. Hold the file at a 90-degree angle to the flat sides of the guide bar. Move the file at a 30-degree angle to the straight line of the chain.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How long does a chainsaw chain last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Why does my chainsaw blade get dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.