Setting Up. Unplug the saw from the power cord or outlet to ensure the blade will not accidentally start during the blade changing procedure. Look for a black button on top of a thin metal rod, just behind the blade guard, on the top of your Porter Cable saw. Pull the blade guard back to expose the blade and fit your wrench to the nut, adjusting as needed for a snug fit.
Robust and fast-cutting, they can cut any material from lumber to concrete – with the proper blade health & hygiene! If you’re wondering how to change the blade on the Porter-Cable circular saw, then you’ve come to the right place. Place the new blade and align the arrows of blade points and the saw. Replace the blade regularly and choose the right blade to improve the functioning of the saw.
Look for a black button on top of a thin metal rod, just behind the blade guard, on the top of your Porter Cable saw. How to Replace the Blade Guard on a Porter Cable Circular Saw.Remove the saw blade. Determine the blade depth by unplugging the saw and holding it alongside your board with the blade guard retracted.
Look for a black button on top of a thin metal rod, just behind the blade guard, on the top of your Porter Cable saw. In woodworking the term circular saw is most commonly used to refer to a hand-held, electric circular saw designed for cutting wood, but may be used for cutting other materials with different blades. Circular saws can be either left or right-handed, depending on the side of the blade where the motor sits.
how to change circular saw blade porter cable Related Question:
How do you change the blade on a Porter Cable 7 1 4 circular saw?
How Do You Change a Porter-Cable Circular Saw Blade? Push the spindle lock button, rotate the blade, and stop after it disengages. Use an anticlockwise motion to rotate the retaining screw with a wrench. Use the retracting lever to pull back the lower blade guard.
Where is the arbor lock on a circular saw?
Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there’s no lock button, press the blade into the wooden surface.
What is spindle lock?
Most cordless impact drivers have a feature called spindle lock that, when selected, locks the motor’s spindle so the chuck cannot turn. Most models of impact driver will have ‘automatic spindle lock’, which means that the chuck and metal bit are automatically locked when the speed control trigger is released.
Which way does a saw blade spin?
Like miter saws, table saw blades rotate clockwise, meaning the teeth should be pointing down.
What size blade does a Porter Cable circular saw use?
Product Description. The PORTER-CABLE PCC661B 20V Max Lithium Bare 5-1/2″ Circular Saw features a high-performance motor delivers 3000 RPM’s for aggressive cutting. It has a 5-1/2″ carbide tooth blade which delivers a 2-1/8′ cutting capacity for a variety of cutting applications.
How do you hammer a circular saw blade?
Place the blade on the anvil. Hammer down all ridges or lumps while using as few blows as possible to avoid expanding the metal too severely. If there’s a loose area, mark it and hammer between the mark and the blade’s rim to stretch out unnecessary tension.
Why is my circular saw blade loose?
Bearings and washers are mainly responsible for holding a saw’s shaft in place. However, wobbles and misalignments may loosen the blade. This can cause problems while cutting. Moreover, the bolt of the circular saw may wear out after regular use.
Why does my circular saw blade stop spinning?
The most common reason your circular saw blade stops spinning is because your workpiece is pinching the blade. This can also cause the blade to kickback. To prevent this from happening you need to support your workpiece properly to allow it to set securely through the entire cut.
Are circular saw blades Universal?
Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices.
Are all door spindles the same size?
Are all spindles the same size? A. They can vary but 8mm (5/16″) square has become a general “standard” for spindles which are European manufactured although 7mm square can also be seen particularly those imported from Australia or New Zealand. Many British spindles are 7.6mm (19/64″) square.
What is drill spindle?
The spindle holds the drill or cutting tools and revolves in a fixed position in a sleeve. In most drilling machines, the spindle is vertical and the work is supported on a horizontal table. The sleeve or quill assembly does not revolve but may. slide in its bearing in a direction parallel to its axis.
