Edge of the belt will be even with the outer edge of sanding. Using the rear handle to control the Sander and the front. The sand belt and extra pressure will only result in uneven.
how to adjust craftsman belt sander Related Question:
How do you adjust the tension on a belt sander?
If the belt is shifting toward the side of the sander that the knob is on, then loosen the knob by turning it about half a turn counterclockwise. If the belt is shifting away from the side of the sander that the knob is on, tighten the knob by turning it about half a turn clockwise.
What is the purpose of the tracking adjuster on a belt sander?
Belt sander maintenance Nondirectional belts can be installed either way. The only adjustment you’ll probably have to make is “tracking” to keep the belt centered on the roller. Hold the sander up, turn it on, and see if the belt either rubs against the housing or starts working its way off the rollers.
How much tension should a belt sander have?
Most wood sanding applications (such as mould sanding using narrow cloth belts) require a belt tension of approximately 40 psi. However, there are some special exceptions. For example, abrasive planing operations using coarse grits typically demand belt tension in the range of 70 to 90 psi.