These tips on how to clean a circular saw blade should help them last longer. You could scour the Internet for quite some time before you exhausted all of the ways tradesmen and woodworkings clean their circular saw blades. We hope you’ve found this How to Clean a Circular Saw Blade article helpful! If you’re a Pro and you have some circular saw blade cleaning tips, add them in the comments below!
In this video, Jackson shares his process for cleaning saw blades. Use a solution designed specifically for cleaning saw blades. Cleaning the blade when pitch builds up on the teeth will help lengthen the blade’s useable life.
Cleaning a saw blade is about as easy as rinsing a razor blade. Even if you don’t use your circular saw very often, it’s still a good idea to give its blade a quick cleaning two or three times a year. Remove the saw blade from your circular saw, being careful of the sharp teeth.
Caustic oven cleaners are sometimes recommended as the best way to clean table saw blades. In addition to being toxic, oven cleaner and saw blade cleaning products with caustic ingredients can potentially damage saw blades. While plain steel saw blades can be sharpened with a triangular metal file, blades with carbide-tipped teeth must be professionally sharpened.
Some people choose to use a five gallon bucket to soak multiple blades at a time – especially if you have a wide variety of circular saw blades and table saw blades. “In case you’re wondering, this is a flat tooth blade that I’ve had in my table saw for at least a year now. It cuts really clean dados and grooves with a flat bottom, as well as regular rip cuts. Most of the dados I cut are for ¼” plywood, and two passes with this blade creates the perfect fit! Using the methods in this article, you can clean all the sharp objects in your workshop and garden shed! However, saw blades aren’t the only thing you need to keep clean.
how to remove pitch from circular saw blades Related Question:
Can you use wd40 on saw blades?
WD-40 Multi-Use is a great rust protection product and it will effectively protect your saw from building rust easily. Once you’ve got your hands on this product, go ahead and apply a thin and even coat on top of your saw blade and spread it using a clean and dry cloth. You can wipe off any excess with the same cloth.
How do I stop my saw blade from whistling?
Whistle while it works. When a standard-kerf blade was used to widen the zero-clearance opening, the whistling stopped. If the blade whistles, it’s the teeth or openings. There’s no fix for the teeth, but you can fill the openings with silicone sealant. Or just give up and get a new blade.
Can you use mineral spirits to clean saw blades?
Place the blade into the bottom of the bucket and pour enough mineral spirits to cover the blade. After 5 minutes or so you should be able to gently brush the resin away with a rag.
Can you use a rusty saw blade?
The blade’s rusted surface can ruin the efficiency of the cutting teeth. In fact, a rusty blade may still be very sharp, but the exposed corrosion will cause the teeth to act as if they are dull. Clean saw blades are not only safer to operate, but they make a smoother cut.
What makes a saw blade whistle?
Abstract. During idling, when the circular saw rotates with resonant frequency, the vortices generated behind the rotating teeth excite the circular saw blade to vibration and the intensive noise of discrete tones, the so-called whistling noise, occurs.
Why does my table saw blade sing?
A: Saw blades can have excessive vibrations or “sing” for many reasons. Usually, it is an indication that a blade has lost its tensioning. As for the safety of the blade, we would not recommend using any blade that is in less than perfect condition. Safety should be your principal concern.
Why is my table saw whistling?
Whistling is generally, but not always, wind such as wind past or through the expansion slots, wind between the saw blade and a zero clearance insert or something similar. Of course sound is air movement and wind is air movement.
How do you remove burn blade marks from wood?
“If burns do show up, you can remove them with a hand plane or a sharp scraper in addition to sandpaper on a sanding block.” Answer from Lee Grindinger: “Sure there is, a scraper or plane will make quick work of the burn marks.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Can you use acetone to clean saw blades?
Acetone – Does a good job removing pitch (and paint). Potential fume issues and not clear what effect a long soaking would have on non-stick coatings. Baking soda – Mix with water and let the blade soak for awhile (one person leaves his blades in solution for 8 hours).