TO INFORM YOU PRODUCT SUPPORT BULLETIN # 516 TO: AUTHORIZED portable electric tool SERVICE STATIONS factory SERVICE / SALES SUPPORT BRANCH DATE: August, 2010 TOOL(S) PRODUCT(S) AFFECTED: 2629-20 M18™ Cordless Band Saw, 6242-6 Compact Corded Band Saw SUBJECT: band saw blade not tracking / ‘blade-coming-off’ Placing a small piece of “0.010” BRASS or BLUE STEEL SHIM STOCK to the rear of the Front Pulley Axle, as pictured, will help change the front pulley axle’s chamber; improving a band saw blades’ tracking and doing-away-with a ‘blade-coming-off’ of either the 2629-20 M18™ Cordless Band Saw or 6242-6 Compact Corded Band Saw. SHIM STOCK 0.004″ to 0.010″ REAR remove the front pulley cover assembly fully unscrew the front pulley axle using a 5/8″ open end wrench re- Loctite® the front pulley axle threads using Blue 242 Loctite® or equivalent thread the front pulley axle back into the blade tension bar assembly just prior to seating the front pulley axle install a 0.004″ to 0.010″ piece of SHIM STOCK , holding it in place with ‘needle-nose’ pliers and snug the axle down ‘rigorously hand’ tight This bulletin is for informational purposes. No. 14-46-0715 SHIM SERVICE KIT for Compact Band Saws The 0.010″ steel shim stock is to be positioned to the rear of the Front Pulley Axle and secured between the Front Pulley Axle and the surface of the Blade Tensioning Bar Assembly.
a. Remove three screws securing the blade pulley cover. a. Align the cogs on the new pulley with the grooves on the new tire. b. Stretch the new tire onto the blade pulley and work the edges smooth.
You saw the title, Portable Bandsaw Blades, and decided that’s an article worth reading, you’re my kind of people. While Milwaukee has been the leaders on the tool side, MK Morse and Lenox have been more popular on the actual replacement blades with standard bi-metal and high performance options like the Lenox Wolf-Band or MK Morse Cobalt 811 band saw blades. In this test both Lenox was only able to complete this cut 7-8 times on average before the blade needed replaced, Milwaukee Extreme Bandsaw Blades 26-28 cuts.
how to replace milwaukee band saw blade Related Question:
Which way do the teeth go on a bandsaw?
On a typical wood or metal cutting blade the hook or of point of the blade should be pointing down for a vertical blade bandsaw, or for a horizontal blade saw the hook of the teeth should be pointed such that they enter the workpiece first as the blade moves.
What does the blade on a portable band saw do?
The blades available for a portable band saw are made in the shape of a ring, or a band. The band continually rotates on the wheels, creating a smooth cutting motion. The band saw can cut straight lines or change direction quickly to create curves.
What do you do with old bandsaw blades?
There is life for those old, broken, and dull bandsaw blades. Just cut the old blade into sections about 12″ long. Stack the pieces together, alternating the teeth so that they don’t touch their neighbors. Use either same tape, or just braze the ends together,.
Can I put a wider blade on my bandsaw?
An 18-inch diameter wheel can use a 0.032-inch thick blade that is 3/4 inch wide. In general, thicker and wider blades will be the choice when sawing dense wood and woods with hard knots. Such wood needs the extra strength of a thicker, wide blade to avoid breaking. Thicker blades also deflect less when resawing.
Can a bandsaw blade be turned inside out?
Re: Turning a band blade inside out hi ,just get heavy gloves,an uncoiled blade ,step on the bottom and turn the blade inside out,and it will go right on a turner mill and just reverse the blade to sharpen. Thanks.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in. blade, I would set the scale to 1/2 in.
Which way should a blade be installed on a circular saw?
When installing a new blade, make sure the teeth are pointing downward to enable a clean cut through the workpiece. Upward-facing teeth can cause a severe injury to the operator.
Which way does a saw blade spin?
Circular saws cut on the upward stroke, which means that they rotate in a clockwise fashion, cutting from the bottom up. This is why when you’re using a circular saw, the side of the wood that will be your “good” side should be facing down.
Is a portable band saw worth it?
What to Consider When Choosing Portable Band Saws. The portable band saw is one of the few tools that, when used with the right blade, is equally effective regardless of material. It can cut straight lines or curves, so it can be used for joints, precision cuts, or decorative work.
How long does a bandsaw blade last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
How long is a shopsmith bandsaw blade?
The Shopsmith Bandsaw accepts continuous- loop blades 72″ long and 1/16″-5/8″ wide. Shopsmith offers a variety of blades from 1/ 16″ wide to 5/8″ wide for cutting wood, plas- tics and nonferrous metals. To use a 1/16″ blade with the Bandsaw, you must install and use Cool Blocks (Part No.