One of the best ways to even it out is to use a belt sander. Load a 120 grit belt on your sander and cut off the highest spots. Hold your sander perpendicular to the grain and gently move the sander back and forth over your pencil marks.
I’ve been making cutting boards to learn the basics of woodworking. One challenge I have with my cutting boards is getting them flat. I have a belt sander and one hand planer, but I can never seem to get it flat.
how to sand flat with belt sander Related Question:
Can you flatten with a belt sander?
A belt sander can remove material in a hurry. With the right tips and techniques, you can use this common tool to quickly flatten glued up panels.
How do you sand a flat surface?
Once you find a place, or a really good piece of wood, then place some sandpaper face up on that surface. Hold it with one hand, and work you piece back and forth against the grit. Do this slowly and carefully, and you will flatten the surface of the piece quickly.
Can I sand a floor with a belt sander?
The handheld belt sander can sand off old finish and sand out dents and scratches much more easily than the previous sanders. While it won’t keep up with the speed of a normal floor sander, the hand held belt sander will get the job moving forward with reasonable speed.
Can you use a belt sander against the grain?
Because they have a lot of power and can handle coarse grits, they excel at the rapid removal of wood. Also, unlike orbital and vibrating sanders, the sanding action is linear, so even with coarse grits you can sand with the grain and get a good-looking result.
How do you get belt sander marks off?
If you used a belt sander, remove belt sander marks with another belt sander. If you sanded across the grain, the best bet for removing those marks is with a lower grit sandpaper than you started with, sanding with the grain.
Why does my belt sander leave marks?
If the inside of your sander has a lot of dust, there is likely an issue with the machine and it often shows in the materials run through the machine. Excessive dust buildup can result in burn marks or lines on the workpiece. Dust buildup can also cause tracking issues and prematurely wear out the belt.
How much wood can you sand down?
I’m not sure where sanding comes into play here, but yes, you absolutely could sand a 1/2″ off of a piece of wood. It will take some time with a belt sander and even more time if you’re doing it by hand. (On the bright side, you’ll build a good bicep that way!)
How long does it take to sand a floor with a belt sander?
It can take 1-5 days for a professional and 2-15 days for a DIY enthusiast, depending on the size and condition of the floor. For planning purposes, it would take 1-day per room for a professional and 2 days per room for a homeowner doing DIY.
How long does it take to sand a floor with a floor sander?
So how long does it take to sand a floor? If you’re using both the electric sander and the edger in 140 square-foot floor space, it will take you roughly 5 hours to do three sanding passes. Another thing you must take into account is how old your house is.
What happens if you sand wood against the grain?
Depending on the tool you employ, sanding with the grain per se might not always be possible, but it is important to avoid sanding across the grain. Sanding against the grain inevitably leaves scratches that defeats the purpose of sanding the wood in the first place.
Do you sand in circles or straight lines?
Don’t sand in circles. Circular motions work great for spreading out of coat of wax over a painted panel but don’t work well for sanding on car paint.
Do you sand wood in circles?
Before that, sand in any way that makes you happy, and that moves the project towards the direction of completion. That can be across the grain, with it, in circles, or on an angle.
How do you know when you’ve sanded enough?
The best way to know when you’re done sanding is to scribble a light pencil line across your wood before you start. Once the line is gone, move up to the next grit. Repeat up to the highest grit sandpaper, then wet your wood with mineral spirits to confirm there are no remaining marks.