A bandsaw will make many cuts with precision and speed-when equipped with the right blade for the application. Bandsaw blades differ in thickness, width, length, and tooth configuration. Every time you change from one bandsaw blade width to another, you have to reset the saw’s tracking, tension, and blade guides.
To achieve a smoother, more refined cut choose a blade that has more TPI. High TPI configurations should be used on thinner materials and may require a reduced material feed rate through the blade. Thicker materials require a low TPI blade, but may be fed through the blade at a higher feed rate. A regular tooth blade is available in higher TPI blades and produces smoother cuts in all woods.
Bandsaw blades come in a variety of widths, tooth designs, materials, and configurations. Or keep reading to learn more about choosing and using bandsaw blades. Never use water as a lubricant on bandsaw blades -or any other blades, for that matter.
With all of these things to consider, it is no surprise that you’re looking for an essential guide to bandsaw blades! The blade width determines how much your bandsaw will cut and the minimum number you want to cut. How many teeth you need for your bandsaw blade is another factor to consider when choosing your blade.
Generally, a skip tooth blade is used for rip cutting, whereas a regular or triangular tooth blade is for cross cutting. “Now you have made the three basic choices, we will guide you through the types of blades that we offer. Depending on the length of blade required, it can be an easy choice or a little more complex. For machines with a blade length up to 70 1/12”, we supply high carbon blades only. For woodturners, we have a unique blade concept, the Back Tooth bandsaw blade.
The wider blades are stiffer overall and tend to track better on the band wheels than narrow blades. Thicker blades are also wider blades and more tension means straighter cuts. Thicker blades are also more difficult to bend around the band wheels, so most bandsaw manufacturers will specify a thickness or thickness range.
how to select band saw blades for wood Related Question:
How do I choose a band saw blade for wood?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What TPI is best for cutting wood?
If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
How many teeth per inch should a bandsaw blade have?
The general rule of thumb is: For wood and soft materials aim for 3 – 6 teeth in the workpiece. For metals and harder materials aim for 6 – 24 teeth in the workpiece.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
What is a 24-tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
Is more teeth on a saw blade better?
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
Which way should the teeth face on a bandsaw?
The teeth on the bandsaw blade should face down so that the cutting action is from the top of the material to the bottom.
What size blade does a 14 inch bandsaw take?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
What is skip-tooth bandsaw blade?
Skip-tooth blades have a less-aggressive rake angle and so make cuts more slowly, but the cuts are much smoother and cleaner. They are a better choice for general use. I outfit all six of the bandsaws in my shop with skip-tooth blades.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.
What size blade does a Ryobi bandsaw take?
Band saw comes with 1/4 In. X 6T Blade, and Miter Gauge.
How long is Ryobi bandsaw blade?
The blade is 62” so remember that when you’re ordering blades.