How to shorten a chainsaw chain: When someone is up for cutting activities like tree felling, lambing, bucking, pruning, cutting firebreaks in the wild land, and harvesting of firewood they are going to need an essential tool, namely Chainsaw. Basically, the teeth of a chainsaw are attached to the chain, so if the chain creates a problem then it goes onto the teeth. In this article, we are going to discuss how to shorten your chainsaw chain on your own.
If the chain has a master link, simply remove it and the necessary amount of other links to make the chain the correct length. Chainsaw chains can be shortened; however, the difficulty of doing so is different depending on whether your chain has a master link. If you’re shortening your chain because it has stretched due to wear and use over time, the chain should not be shortened.
To add, you need to know how to shorten a chainsaw chain. If you choose to do it yourself, make sure that you acquire all the needed instruments, like the chain breaking tool and others, and know how to perform all the steps mentioned above and shorten the chain. We sincerely hope that this article will be your useful guide how to shorten a chainsaw chain and you will manage to perform this task without any obstacles.
how to shorten chainsaw blade Related Question:
Can you change the length of a chainsaw blade?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Why does my chainsaw chain keep stretching?
A chainsaw chain stretches and loosens from tension and extreme friction. The friction from cutting through wood makes the chain very hot and the heat causes it to loosen. The heat expands the guide bar and when it cools, the chain has stretched. The chain will also loosen as it wears down from use.
How loose can a chainsaw chain be?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
Can I put a 20 inch bar on my 18-inch chainsaw?
Changing the bar and chain on your 18-inch chain saw to a 20-inch size will enable easier cutting of larger trees and branches. Larger chain saws cut through thicker trees and limbs.
Can I put any length bar on a chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
How often should you replace your chainsaw chain?
The chain sprocket must be replaced if the depth of the wear marks reaches about 0.5mm, i.e. the wear limit. A seriously worn chain sprocket can cause the chainsaw chain and guide bar to wear at an increased rate, as well as reducing cutting performance too, so it’s important to keep an eye on.
Do chainsaw chains have a master link?
Locate the master link that most manufacturers install to make removal of the chain a simple process. A visual inspection of the chain will reveal the master link due to its appearance that makes it stand out slightly from the other links.
How much will a chainsaw chain stretch?
How much will a Chainsaw Chain Stretch? Chainsaw chains stretch considerably after their first run, with about 1/100 of an inch per link. A longer chain with 75 links stretches around 0.75 inch. A shorter chain will still stretch almost half an inch.
Is my chain too long?
Here’s How: Do a simple check on your bike by shifting the chain to the big chainring and the biggest cassette cog; then, push on the end of the derailleur cage (pushing forward) to see how much it will move forward. If it moves just a little, then you’re good. If it moves a lot, then you’ve got too much chain.
Can a rope chain be shortened?
Shortening rope chains, snake chains, and thick, stone-studded cuban/curb chains aren’t as easy as the usual chain shortening process. While the principle of removing the section and reattaching the clasp to the remainder of the item remains the same, the process is irreversible for these items.
How do you shorten a gold chain without cutting it?
Without cutting the chain If your chain is not too big, slip a pendant over your chain and tie a knot just above. Place your clasp on another link, somewhere else on the chain. By closing your necklace, you will have a piece of chain that will hang down as if it were an extension chain.
Why is my chainsaw blade smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why is my chainsaw chain not tightening?
If you’re having trouble tightening the chainsaw chain, it may be adjusted properly already. Check the tension on the chain by grasping it in the middle of the top of the guide bar and giving it a quick snap. The chain should quickly snap back into place with no sagging on the underside of the guide bar.
How many times can you sharpen a chainsaw chain?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.