In order to determine bandsaw blade length for your saw, please reference our Bandsaw Blade Lengths & Manufacturers page for a list of common saws and sizes. If you cannot find your saw model or are unable to locate a manual, Detroit Band Saw can teach you how to determine bandsaw blade length. If you do not have an existing blade, there is a mathematical equation to help determine saw blade length in inches.
There are three different ways to measure the length of a bandsaw blade. Apply the following formula: + + = Saw blade length. Stand the blade hoop up on the strip of tape, and use a pen to mark a line on the inside of the blade and onto the tape. Roll the blade in a straight line for one rotation – until the mark on the inside of the blade hits the floor. Hold the blade steady so that the mark remains at the floor, and make a finishing mark there on another piece of tape. Measure the distance between the marks made on the two pieces of tape. If the ends do not nest together perfectly, then some length of the blade has broken away when it sheared, and you won’t be able to make an accurate measurement of its original length.
If you want a good blade for the task, check out the Olson Saw Hook Saw blade works well thanks to its easy to use and durable nature. You know how to calculate your band saw’s blade length, so we’ll look at how to get the width and depth measurements. Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure.
“We don’t know what bandsaw blade length fits your bandsaw either, but fortunately it’s easy to find out. It’s especially easy, of course, if you have an old bandsaw blade that fits the saw-just measure its length. Make a mark on the inside of the blade, and align it with the zero point on a measuring tape laid on the floor. Roll the blade along the tape until the mark reaches bottom center again, and there’s your measurement. The exact measurement is just a target, by the way – if your bandsaw blade measures 114-5/8″, you don’t have to special-order that exact length. If you don’t have a blade to measure, or if you simply want to know if a 93″ blade will fit a saw rated to handle 92”, here’s how to determine the range of lengths you can expect to mount on your saw. Bandsaw Blade length listed in owner’s manuals is usually the average of these two figures, or a convenient whole number somewhere in the vicinity.
To achieve a smoother, more refined cut choose a blade that has more TPI. High TPI configurations should be used on thinner materials and may require a reduced material feed rate through the blade. Thicker materials require a low TPI blade, but may be fed through the blade at a higher feed rate. A regular tooth blade is available in higher TPI blades and produces smoother cuts in all woods.
If you lost your bandsaw owner’s manual and don’t have a blade to measure from, or if you’ve added riser blocks, put this simple math formula to work to determine your tool’s blade length:Blade length = +. Key_A= distance in inches between bandsaw wheel centers when the upper wheel is midway in its adjustment rangeB= bandsaw wheel diameter.
how to size a bandsaw blade Related Question:
How do I know what size band saw blade I need?
Hold the blade steady so that the mark remains at the floor, and make a finishing mark there on another piece of tape. Measure the distance between the marks made on the two pieces of tape. That’s the length of your bandsaw blade!
How is bandsaw blade width measured?
Bandsaw blade width can determine how straight you can make a cut, how tight a curve (radius) or the shape you can achieve with your bandsaw. The blade width is measured from the tooth tip to the back edge of the blade, as per the example diagram.
How is band saw size measured?
Rob Johnstone: Band saw sizes are derived from the diameter of the wheels in the saw. So a 14-inch band saw will have wheels that are 14-inches in diameter. There is another measure that indicates how wide a board you can resaw.
How do I know which bandsaw blade to use?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
What size blade does a 9 inch bandsaw take?
9″ Ryobi, 9″ B&D, 9″ Craftsman, 9″ Tradesman, 9″ Pro-Tech, 9″ Collins, B&D 3 Wheel. 0.50 (1/2 in.)
What size blade does a 12 inch bandsaw take?
The Craftsman 12″ Bandsaw-Sander takes an 80″ blade or an 80″, 1/2″ wide sanding belt. There is a Vacuum port on the back of the saw. Hook the shop vac to the port during operations.
What is 18 TPI for cutting?
Blades 12-18 TPI are typically used for metal and denser materials as well as finish cuts in wood. The 18-24 TPI range is almost always used for metal cutting. Pro Tip: Always keep 3 teeth in contact with the material being cut.
How long is a 14 bandsaw blade?
Olson® All Pro&trade band saw blades 93-1/2″ length fits most 14″ band saws (Delta, Jet, etc.), hard back and exclusive material, in skip, hook, or regular teeth.
How do you measure the depth of a bandsaw blade?
Also known as the thickness, the depth of your band saw’s blade is easy to measure with a tape measure. Place the tape measure on one edge of your band saw then slowly pull it until you reach the other end.
Do I need a 14 inch bandsaw?
For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
What do band saw sizes mean?
The size of a band saw is given in inches, with 14-inch being the most common. The size refers to the distance between the blade and the saw’s throat, or the column that supports the upper wheel. Band saws range in size (and price) from 10-inch benchtop machines to 24-inch freestanding ones for professional shops.
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
How tight should my bandsaw blade be?
The blade should deflect no more than 1/4 in. A good place to begin is to tension the blade until the meter reads proper tension for the next wider blade. For example, if you’re tensioning a 3/8-in.
What does TPI mean on a bandsaw blade?
You must select the correct Teeth Per Inch (TPI) for the thickness of material you are cutting.
What size blade does a Ryobi 9 inch band saw use?
Sliding Miter Gauge. Includes 9 In. Band saw comes with 1/4 In. X 6T Blade, and Miter Gauge.