How to Start a Chainsaw That’s Been Warmed Up.If you’re taking a short break from using the chainsaw, then you can restart it without using the choke since the engine is already primed with fuel. If you haven’t purchased a chainsaw yet, I encourage you to take a look at my best gas chainsaw reviews. Check out my best 18 inch chainsaw page and best 16 inch gas chainsaw page to see what you can get.
The chain brake should be activated when you start the chainsaw. Release the front handle and allow gravity to bring the chainsaw down, rotating around the rear handle, towards the stump. Hold the chainsaw firmly by the front and rear handles.
how to start a chainsaw properly Related Question:
Do you start a chainsaw with the brake on or off?
Check the Chain Brake When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What makes a chainsaw hard to start?
A fuel issue is one of the most common reasons why a chainsaw won’t start. If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel. A common indication the engine has been flooded is the smell of gasoline in the air.
What does the choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
Why can’t I start my Stihl chainsaw?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
How long does a spark plug last in a chainsaw?
A poorly functioning engine in a Stihl chainsaw can mean more work for the operator and can even be dangerous. Consequently, Stihl recommends replacing the spark plug after every 100 service hours.
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
Should the choke be open or closed?
Should Choke Be Open Or Closed When Running? Having been in operation over the last few days, a gas engine that is still warm doesn’t require an choke. When it is warm, the fuel can evaporate quickly. It is recommended you close the choke the most if the engine is cold outside and it is warming outside.
What is the choke on symbol?
The choke on symbol for most small engines looks like a horizontal ( — ) or diagonal ( / ) line. It also can simply say ‘Choke’, ‘Full Choke’, or ‘Start’. The off symbol for most small engine chokes is represented by a vertical line ( | ) or the word ‘Run’. Hopefully you have learned something here.
What happens if choke is left on?
Leaving the choke on for too long will cause unnecessary engine wear and waste fuel. This is also bad for the environment. The choke is mainly used during winter to help with starting. The engine needs its fuel to be vaporised in order to burn it.
Can you start a chainsaw with a cordless drill?
NOTE: A battery-powered drill is often not enough to start your chainsaw fast enough. In that case, use an electric drill plugged in a wall outlet. Sometimes the bolt will strip out and when you crank up, the bolt can come out.
What does a spark arrestor do on a chainsaw?
The spark arrestor on your chainsaw prevents dangerous hot sparks from igniting fires while you’re working. If the arrestor is clogged or dirty, however, it will also prevent exhaust from leaving the motor, which can prevent it from running.
Will a flooded engine fix itself?
Will a flooded engine fix itself? No. You have to take appropriate measures to restore the fuel and air balance in your car’s engine.
Why is my chainsaw flooding?
There could be various causes: incorrect fuel mixture, carburation not calibrated properly, or a wet spark plug. In spite of their power and robustness, chainsaws are actually rather delicate machines that require careful and precise maintenance at every stage of their life cycle.