If the operator has repeatedly been trying to start the chainsaw through the recoil starter system, they may have accidentally flooded the engine with fuel. If you believe fuel has flooded the chainsaw engine, pull the starter cord several times while holding the throttle, dry and replace the spark plug, and then try starting the chainsaw again. Gasoline will start to deteriorate if left unused and sitting, so if the chainsaw hasn’t been started in a while, be sure to check that old fuel is not collecting inside the chainsaw.
Here, we look at the top 11 reasons why your chainsaw won’t start. Another common reason a chainsaw won’t start is that the sparkplug is old, dirty, damaged or not correctly attached. If the temperature is too low, it can make it hard to start a chainsaw.
A chainsaw can be a very useful tool for homeowners and professionals alike, until it stops working! When your chainsaw won’t start, it can cause a setback with your project and could even set you back financially for repairs. In this chainsaw starting guide you’ll learn the common problems that can arise with chainsaws as well as possible solutions. The recoil starter assembly consists of several elements that initiate the engine when starting the chainsaw such as the recoil starter pulley and rewind spring.
how to start a chainsaw that won’t start Related Question:
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
How long does a spark plug last in a chainsaw?
A poorly functioning engine in a Stihl chainsaw can mean more work for the operator and can even be dangerous. Consequently, Stihl recommends replacing the spark plug after every 100 service hours.
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
Will a flooded engine fix itself?
Will a flooded engine fix itself? No. You have to take appropriate measures to restore the fuel and air balance in your car’s engine.
Can you use starter fluid to start a chainsaw?
If you do not use it often, then you are okay to use starter fluid to start the chainsaw up.
Why is it so hard to pull start my chainsaw?
If your chainsaw is hard to pull, here are some common causes: The pully system is snagged or stuck. The starter assembly is stuck or sticky. The housing may be damaged.
Why is my Stihl so hard to start?
Problems starting a Stihl chain saw can be related to gasoline storage, spark plugs, and incorrect starting procedures.
How often should you tune up your chainsaw?
Obviously this depends to some degree on how often and how heavily you use your chainsaw but experts generally recommend you get a professional service or check-up from every few months for heavier use to at least once a year for light use.
How do you start a flooded engine carburetor?
For flooded carburetored engines, a standard remedy is to crank the engine with the throttle fully open while holding the pedal firmly open to maximize air flow and eliminate all of the excessively rich fuel.