We’ve put together this comprehensive video guide to help you get your new SGS chainsaw ready for lopping down unruly branches or cutting logs for an open fire. Always have chain oil within the chainsaw otherwise the chain and bar will seize. Turn the chainsaw on and use the choke function toggle as advised on the chainsaw for the conditions it will be started in.
If you agree, we’ll also use cookies to complement your shopping experience across the Amazon stores as described in our Cookie Notice. Click ‘Customise Cookies’ to decline these cookies, make more detailed choices, or learn more. You can change your choices at any time by visiting Cookie Preferences, as described in the Cookie Notice.
how to start sgs chainsaw Related Question:
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
Do you start a chainsaw with the brake on or off?
Check the Chain Brake When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What does the choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
Why can’t I start my Stihl chainsaw?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
What is the easiest starting chainsaw?
The best gas-powered model, the ECHO 18 in. Gas 2-Stroke Cycle Chainsaw, is easy to start and has impressive cutting power.
How long does it take for a chainsaw to Unflood?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
Why does my chainsaw have too much compression?
Many problems with compression are related to fuel. Old or bad fuel can cause lots of headaches with yard equipment. Try draining any of the gasoline mixture left in the gas tank and add fresh fuel. If this does not solve the problem, it may be related to excessive fuel caused by problems in the gas lines and filters.
Can you use easy start on 2 stroke?
Yes, you can use starting fluid on a two stroke engine, but it must be used with CAUTION. Two stroke engines has OIL mixed with the gas for lubrication of the moving parts of the engine.
Is a chainsaw 2-cycle?
Chainsaws and weed eaters use the same type of motor: the two-cycle, or two stroke, engine. Unlike a larger engine on a car, these compact engines use fuel and oil mixed together to power a piston and crankshaft.