Stihl chain saws have a choke that makes cold starting easier, but you have to use it properly. If the engine doesn’t start on the first three or four pulls, the fuel and air mixture becomes fuel rich, and if you continue to pull the starter while the choke is closed, there is too much fuel to ignite and the engine floods. You can simply wait for the fuel to drain, but there is a faster way to clear the engine.
Starting a flooded chainsaw – A quick guide One of my youngest memories is being with my father in an orchard somewhere cutting trees for firewood. Let your chainsaw sit for 15-20 minutes to allow the fuel to evaporate from the engine and then repeat the starting instructions. Employe short, brisk pulls instead. If the engine does not start in 15 pulls then the spark plug may be ‘wet fouled’.
If given the opportunity to flood, a two-cycle engine will do just that. It is best to prevent this from happening, but if it does, it is a problem that can be fixed. The fuel has to be removed from the combustion chamber, which on the surface sounds complicated.
How to prevent a chainsaw from floodingPreventing a chainsaw from flooding may not be a feasible task. Step 4: Do not force the chainsaw to startSometimes making a cold start on any two-stroke chainsaw engine requires a few tries until it is started successfully. The spark plug is the main component of the ignition, respectively, of the start of the operation of the entire mechanism of any of the gasoline-powered tools knowing how to start a flooded chainsaw will be useful to both a beginner and an experienced user.
If you need to learn how to start a flooded chainsaw, don’t worry, you’re not alone. For starters let’s look at how the engine became flooded to begin with, and then I’ll show you a couple of really easy ways to get your chainsaw up and running again. The second option is my favorite way to start a flooded chainsaw and I believe it’s the easiest and most effective way.
how to start stihl chainsaw flooded Related Question:
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
How do you start a flooded engine?
Perhaps the best remedy for a flooded engine is time. Simply open the hood of your car and let excessive fuel evaporate for as long as you can. After about 20 minutes try starting your car again without hitting the gas pedal. If this still does not work, you may have to check your spark plugs.
Will a flooded engine fix itself?
Will a flooded engine fix itself? No. You have to take appropriate measures to restore the fuel and air balance in your car’s engine.
Why is my chainsaw flooding?
There could be various causes: incorrect fuel mixture, carburation not calibrated properly, or a wet spark plug. In spite of their power and robustness, chainsaws are actually rather delicate machines that require careful and precise maintenance at every stage of their life cycle.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
Why is it hard to start my Stihl chainsaw?
Problems starting a Stihl chain saw can be related to gasoline storage, spark plugs, and incorrect starting procedures.
What makes a 2 stroke hard to start?
(1) That you’ve flooded the engine by trying to start it, or that the lower end is loaded up (because you left the gas petcock on). (2) That there is no spark (thus, the plug is wet because the plug never ignited the fuel).
How do you fix a flooded engine?
To fix a flooded engine, you basically want to get the air to fuel ratio back to its usual balance. You can first try to simply let the excess fuel evaporate. Open your hood and wait a couple minutes before you try to start your car again. And when you do start it back up, make sure you aren’t pushing on the gas pedal.
What happens if you put too much oil in 2 stroke?
Excess oil can produce a smoky exhaust, oil leaking out of the muffler, and sometimes loss of power. While not ideal, these issues can be fixed by simply replacing the fuel in the tank with properly mixed fuel. But running a two-cycle engine with too little oil can actually destroy the unit.
Why is my carburetor flooding?
The most common cause of flooding is dirt in the needle & seat. What happens often is you clean your carburetor, then start the engine. Dirt from a dirty gas tank, or in the fuel line rushes up and into the carburetor.