How to Start a Chainsaw That’s Been Warmed Up.If you’re taking a short break from using the chainsaw, then you can restart it without using the choke since the engine is already primed with fuel. If you haven’t purchased a chainsaw yet, I encourage you to take a look at my best gas chainsaw reviews. Check out my best 18 inch chainsaw page and best 16 inch gas chainsaw page to see what you can get.
The chain brake should be activated when you start the chainsaw. Release the front handle and allow gravity to bring the chainsaw down, rotating around the rear handle, towards the stump. Hold the chainsaw firmly by the front and rear handles.
A Husqvarna chainsaw will be different from an Echo chainsaw, and you might not know how to operate the one you are about to start. Before starting a chainsaw, make sure you are wearing all the proper protective gear, including chainsaw chaps, eye goggles, ear protection, chainsaw gloves and protective footwear. Don’t drop start – A drop start is where you hold the chainsaw in one hand and pull the starter rope with the other.
how to turn chainsaw on Related Question:
Do you start a chainsaw with the brake on or off?
The chain brake should be activated when you start the chainsaw. Many chainsaw models can be started in what is known as ‘half-throttle’ position. In this position, the chain can rotate – if the chain brake is not activated.
What does the choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
What is the choke position?
The choke is located before the throttle, and manages the total amount of air going into the engine. The choke is only used when starting a cold engine. When doing a cold start, the choke should be closed to limit the amount of air going in.
Why can’t I start my Stihl chainsaw?
Dirty or clogged fuel tanks, dirty fuel filters and lines, loose fuel hoses, dirty air filters and a dirty carburetor can all restrict fuel flow. Check, clean and replace all the fuel system parts before moving into the internal engine, as gas problems create a majority of starting problems.
How does chainsaw kickback happen?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
Do you want the choke open or closed?
Should Choke Be Open Or Closed When Running? Having been in operation over the last few days, a gas engine that is still warm doesn’t require an choke. When it is warm, the fuel can evaporate quickly. It is recommended you close the choke the most if the engine is cold outside and it is warming outside.
What is the choke on symbol?
The choke on symbol for most small engines looks like a horizontal ( — ) or diagonal ( / ) line. It also can simply say ‘Choke’, ‘Full Choke’, or ‘Start’. The off symbol for most small engine chokes is represented by a vertical line ( | ) or the word ‘Run’. Hopefully you have learned something here.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
Is a chainsaw 2 cycle?
Chainsaws and weed eaters use the same type of motor: the two-cycle, or two stroke, engine. Unlike a larger engine on a car, these compact engines use fuel and oil mixed together to power a piston and crankshaft.
Why do you need a choke?
A choke valve is sometimes installed in the carburetor of internal combustion engines. Its purpose is to restrict the flow of air, thereby enriching the fuel-air mixture while starting the engine.
Is throttle and choke the same?
is that choke is a control on a carburetor to adjust the air/fuel mixture when the engine is cold while throttle is a valve that regulates the supply of fuel-air mixture to an internal combustion engine and thus controls its speed; a similar valve that controls the air supply to an engine.
Does choke open or closed carburetor?
Normally choke will be in open position, in which valve is parallel to the air flow, and has no effect on the air flow. When choke is actuated by mechanical or by pneumatic method, it rotates an angle restrict the air flow (closed position).
What happens if choke is left on?
Leaving the choke on for too long will cause unnecessary engine wear and waste fuel. This is also bad for the environment. The choke is mainly used during winter to help with starting. The engine needs its fuel to be vaporised in order to burn it.
What does turning on the choke mean?
Turning the choke on will produce a rich mixture that has more fuel than air. Rich mixtures combust more efficiently when the engine is still warming up. Turning the choke off increases the amount of air flowing into the engine, producing a lean mixture with more air and less fuel.