Not exactly the most straightforward DIY job, sanding wooden floors with a belt sander isn’t exactly rocket science either. Before we jump into the actual steps of sanding wood floors with a belt sander, we need to go through the equipment you’ll need to increase the chances of doing a great job. The first step of our ‘how to sand wood floors with a belt sander’ guide is removing the old finish.
how to use a belt sander on hardwood floors Related Question:
Can you sand hardwood floors with belt sander?
A belt sander for finishing a wood floor should be a hand-held one so you can move the tool around on the surface of the floor. Belt sanders will do a good job of leveling out the floor and preparing it for a finer sand.
How long does it take to sand a floor with a belt sander?
It can take 1-5 days for a professional and 2-15 days for a DIY enthusiast, depending on the size and condition of the floor. For planning purposes, it would take 1-day per room for a professional and 2 days per room for a homeowner doing DIY.
What grit sandpaper should I use for hardwood floors?
Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.
How many sanding sheets do you need to sand a floor?
How long does it take to sand a floor? It’s hard to say without knowing the size and condition of your flooring. But with the right tools (like a drum sander and edger), you should do three sanding passes in an average-sized living room or bedroom in a day.
How many times should you sand floors?
Hardwood flooring can be re-sanded up to 10 times, depending on how bad the floor is and how skilled the person doing the sanding is. It costs about $2.50 per square foot to refinish a floor, plus $50 an hour for patching and thresholds.
Are my floorboards suitable for sanding?
Only when your floors are free of the old layers of varnish, stain and grime can move on the less coarse paper. If your floorboards are ‘just’ dirty or have a thin coat of paint on them, starting to sand with 24 grit sandpaper should be sufficient.
Can I use an orbital sander on hardwood floors?
Random orbital sanders are the best choice for do-it-yourself hardwood floor refinishing. They take longer to remove old finishes than drum sanders, but they do not require a lot of experience to use and are less likely to damage your wood floor.
Can I stay in my house while floors are refinished?
The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
What do you put on newly sanded floorboards?
You can use a clear or tinted varnish to seal sanded floorboards. Put on three coats to get a really hard-wearing finish and make sure your brush is completely clean before you start.
Should you push down on a belt sander?
You do not have to push down on the sander. Pull the sander backward letting the weight and sharpness of the belt cut the surface. Don’t pull back and then tip the sander off the edge or you’ll cut off too much wood and need to build it back up with putty.
How tight should a belt sander be?
In basic terms, the amount of tension on the coated abrasive belt should be just enough to keep the belt from slipping on the drive wheel, and to keep the belt from tracking off the wood working machine.
How should the belt sander be placed when setting it down after the sanding?
6. When finished sanding lift the belt sander off the material and then release the Off/On switch. 7. Lay the belt sander on its side when setting the tool down.
How hard is it to use a floor sander?
There’s really no getting around it – sanding your floors is hard work and physically tiring. When you first start sanding you’ll almost instantly see a huge difference in your floor but once you’ve removed most of the varnish and dirt progress will seem so much slower.
Do you push or pull a drum sander?
You will be pulling your drum floor sander, not pushing. This means that you are moving the sander in the opposite of the drum motion. Do not attempt to get close to trim, baseboards, doors, walls, and other elements that will not be sanded.