If you need to cut workpieces that must be cleanly and accurately joined together, a circular saw and a guide rail is the way to get this done. Clean, accurate cuts over and over are possible when using a guide rail. The saw is also compatible with other makes of guide rail.
With guided cutting, your saw follows a guide – either an edge guide or a track guide – to create the precise results you’re looking for. These solutions are portable, so you can easily set up your saw and guide wherever you’re building. Learn where each guide excels and find the right Kreg guide for your cutting needs.
how to use a circular saw cutting guide Related Question:
Why would you want to use a guide with a circular saw?
Accuracy is important when cutting wood. To help prevent cuts from veering away from the cut line, watch the blade as it moves along the line and not only the guide markings that are on the saw’s shoe. Using a saw guide will ensure the tool cuts in a straight path.
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
How do I make an accurate cut with a circular saw?
Using a Straightedge for Accurate Circular Saw Cuts Measure the exact distance from the edge of the circular saw’s shoe to the same side of the blade. Once you have that measurement, add it to your original marks and make a new line. Set the straightedge on the new marks, clamp it down, and make your cut.
Is there a guide for a circular saw?
A circular saw guide rail is a critical tool for making straight cuts on large boards, but choosing the best one for your workshop is not easy because there are many brands available, and a lot of newer woodworkers aren’t sure how to tell the difference from one brand to the next.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Will a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Can a circular saw make miter cuts?
When extreme precision isn’t required, you can cut 45-degree miters using a portable circular saw and speed square. 7. Hold the square against the board, then guide the saw along the square to make the cut.
Which cut is when you cut a straight 90 degree across the grain?
A crosscut is a straight, 90-degree cut that cuts across the grain of the wood. Usually, that means turning long boards into shorter ones. On a table saw, you will usually use a miter gauge to make crosscuts. It’s the most basic cut you can make.
What is a rip guide on a circular saw?
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting.
Is it a guardrail or guide rail?
Guard rail is more common, but guide rail is acceptable. According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.”[4] Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
Are track saws worth it?
Conclusion. A track saw is unbeatable when it comes to making long, accurate cuts. It can do most things a table and circular saw can, while being more portable than a table saw and more accurate than a circular saw. It’s also better than a table saw at breaking down large sheets of plywood.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
