If you need to cut workpieces that must be cleanly and accurately joined together, a circular saw and a guide rail is the way to get this done. Clean, accurate cuts over and over are possible when using a guide rail. The saw is also compatible with other makes of guide rail.
Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
The answer is you can’t unless you use a circular saw guide rail or press your saw against a straight edge. That is where a circular saw guide rail or circular saw track system comes into action. The track saw or plunge cut saw works essentially the same way how you use a circular saw with guide rails systems.
Things You Need to Know about Circular Saw Guide Rail A guide rail is always handy when using a circular saw, whether you are a DIYer or professional woodworker, as it ensures accurate and high-quality cuts. According to the Thomas Steven from Mywoodgear, circular saw blades are as important as circular saw guide rail, after all they are the main object that has to cut wood in the end. Types of Circular Saw Guide Rails As you consider adding a guide rail to your circular saw, you often need to pick from several options.
We use cookies to provide basic functionality and improved security. We also use 3rd-party cookies to improve your browsing experience and for targeted advertising. Learn how to build an easy circular saw guide rail with a step-by-step tutorial, measurements, and video.
how to use a circular saw guide rail Related Question:
Do you need a guide rail for circular saw?
If you want to make accurate cuts when using a circular saw and do it consistently, you need a guide rail. With these rails, you can control the blade far much better than when cutting without one. When cutting hard lumber, the blade can move unexpectedly, which can affect the cut accuracy.
How do you use saw guides?
Figure A: Straightedge Guide Glue the fence to the base, then run the saw against the fence to cut the guide. The factory edge is used for the fence. To use the guide, simply clamp it to the piece you’re cutting, aligning the base with the cut line.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
What is a circular saw guide?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time. This Toolstop guide has been created to show you the benefits of using a circular saw guide rail and how to do so.
How do you cut a circular saw accurately?
Using a Straightedge for Accurate Circular Saw Cuts Measure the exact distance from the edge of the circular saw’s shoe to the same side of the blade. Once you have that measurement, add it to your original marks and make a new line. Set the straightedge on the new marks, clamp it down, and make your cut.
Is it a guardrail or guide rail?
According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.” Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Why won’t my circular saw cut all the way through?
Here are some reasons your circular saw keeps stopping: Make sure your work piece is properly supported so it doesn’t pinch the blade which could also cause kickback in addition to stopping. Damaged, warped, loose or dull blade. Motor malfunctioning or overheating. Cable problems like frayed cord or weak connection.
Why do circular saws cut upwards?
The saw’s motor runs the blade rotation in a way that the circular saw teeth direction points up as it enters the wood you’re cutting. It’s intentional to create the most stable, accurate, and safe cutting. As the blade teeth hit the material, they rip from the bottom through the top.
Why are my circular saw cuts curves?
Check whether the blade is parallel with the edge of the base, the edge that goes against the guide. If the blade is further away at the front, it’s going to want to walk away from the straight-edge. This is probably easiest to do when the base is in the 90 degree position rather than set at a bevel.
