If you need to cut workpieces that must be cleanly and accurately joined together, a circular saw and a guide rail is the way to get this done. Clean, accurate cuts over and over are possible when using a guide rail. The saw is also compatible with other makes of guide rail.
Things You Need to Know about Circular Saw Guide Rail A guide rail is always handy when using a circular saw, whether you are a DIYer or professional woodworker, as it ensures accurate and high-quality cuts. According to the Thomas Steven from Mywoodgear, circular saw blades are as important as circular saw guide rail, after all they are the main object that has to cut wood in the end. Types of Circular Saw Guide Rails As you consider adding a guide rail to your circular saw, you often need to pick from several options.
how to use a guide on a circular saw Related Question:
Can you use a guide rail with a circular saw?
A Guide Rail is designed to be used with a Circular Saw for creating precise and straight cuts every time.
Why would you want to use a guide with a circular saw?
Accuracy is important when cutting wood. To help prevent cuts from veering away from the cut line, watch the blade as it moves along the line and not only the guide markings that are on the saw’s shoe. Using a saw guide will ensure the tool cuts in a straight path.
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
Which side should the blade be on a circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
What is used to guide the piece through the saw?
A “Push Stick” is: A plastic handle or scrap wood shaped so that you can guide the work piece without getting your fingers near an active blade.
What is a circular saw guide rail?
A circular saw guide is designed to ensure absolute accuracy when making straight cuts of 45° and 90°. The guide also minimises the creation of splinters and helps to make sure of a clean, straight edge. Range includes guides with adhesive backing for improved security during the cutting process.
Can you use Makita circular saw on guide rail?
Enables use of DHS680 Circular Saw with the Makita guide rail system. This adaptor can be attached to Makita circular saws, which allows you to use the circular saws with the Makita SP6000 guide rail system for precise, straight routing cuts.
Is it a guardrail or guide rail?
Guard rail is more common, but guide rail is acceptable. According to the US Federal Highway Administration, “The terms guardrail and guiderail are synonymous, and are used in different regions around the country.”[4] Guide rail and guard rail are intended to steer and “guide” vehicles back onto the road.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
Why is my circular saw kicking back?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback. Never set a blade deeper than is required to cut the work piece 1/8 in. to 1/4 in.
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Can you put a circular saw blade on backwards?
When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
