You can buy very inexpensive angle grinder tool, but for frequent use or for demanding jobs like cutting stucco or cement, I’d recommend spending a little more for a grinder with a more powerful motor. Outfitted with a grinding wheel, an angle grinder is a great tool for restoring edges on rough-and-tumble tools like hoes, shovels and ice scrapers or for the initial grinding of axes, hatchets and lawn mower blades. Finally, with the grinder off, rest the grinding wheel against the blade and adjust the angle of the grinder to match the blade’s bevel.
We got our Pro team together to give you some tips on how to use an angle grinder from basics to some advanced techniques and shortcuts. Additional Pro Tips on How to Use an Angle GrinderBefore applying the grinder to the work surface, allow the tool to reach full speed. If you’ve got any tips or tricks on how to use an angle grinder, feel free to leave your input in the comments section below!
The secret to successfully using an angle grinder is choosing the right type of cutting disc. Consider how much wood you want to remove and how fast to define the correct cutting disc for your needs. The angle grinder size is determined by the size of the disc, not the length of the tool itself.
If you have to cut concrete or do a heavy amount of grinding a 9 Inch grinder is a lot faster and more suitable for the job compared to a smaller handheld grinder. A 9-inch angle grinder with a cup stone attachment will do nicely for grinding concrete and leveling bumps in concrete floors. If you need to do a lot of refinishing work on a floor, you might be better off using a dedicated floor grinder instead. These tools will grind concrete much more quickly than by hand.
how to use an angle grinder Related Question:
Do you push or pull an angle grinder?
Allow the wheel to pull itself through the workpiece rather than trying to force it through. This minimizes friction and force, and helps extend the life of the cutting grains. Don’t push too hard. Pressure and heat are the biggest enemies of abrasive cutting products.
How do you grind with an angle grinder?
For surface grinding, use the flat part of the wheel, maintaining a 20°-30° angle between the tool and the work surface. Position the blade guard at the back towards your body. Use a smooth back and forth motion to guide the flap disc over the material.
Is it hard to use an angle grinder?
But for quick, rough cuts, it’s hard to beat a grinder. I’ve used an angle grinder to cut rebar (Photo 3), angle iron, rusted bolts (Photo 4) and welded wire fencing. Use an inexpensive cutoff wheel for these and other metal-cutting tasks.
Can you use a cut off wheel on an angle grinder?
Usages. You can use cut-off discs for cutting metal bars, metal tubes and small pieces of metal sheets and plates. You can also cut out welds with them. For shortening the length of various bolts, it is also a good idea to use an angle grinder and a cut-off wheel.
Do angle grinders spin clockwise?
The simple answer is yes. Angle grinder rotates in opposite direction as thread pitch. It is general rule for all nut clamped tooling.
What is the process of grinding?
Grinding, also called surface grinding, is a machining operation in which material is removed using a powered abrasive wheel, stone, belt, paste, sheet, compound, etc. to realize fine finish tolerances and surface finishes.
What are most angle grinder injuries from?
In 2008, nearly 25,000 were injured nationwide while using angle grinders (U.S. Consumer Product Safety Commission). The majority of these injuries occur from an abrasive blade shattering, diamond-blade segment loss, or the angle grinder kicking back.
What PPE is used for grinding?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) to protect against flying particles. Gloves, aprons, metatarsal safety boots, hearing protection, and respiratory protection may be required, depending on the work. Ensure the floor around the work area is clean.
What is the difference between a cutting disc and a grinding disc?
Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting.
What is the difference between a grinder and an angle grinder?
In a nutshell, a die grinder is typically smaller and has several different attachments that can help you cut, sand, polish, and various other things. The angle grinder is a larger and often heavier tool that uses a rotating wheel to grind, sand, or cut larger materials.
What can you not do with an angle grinder?
Angle Grinder Use Angle grinders generate sparks. When required obtain a hot work permit before use. Keep work area clear of debris and flammable materials. Do NOT use in areas where there is grain dust or other combustible dust accumulation.
Do angle grinder sparks hurt?
Conclusion. In summation, the sparks that result from cutting or grinding metal can be dangerous. Not only can they burn the eyes and skin, but they also can also ignite flammable materials such as wood, paper, or fabric causing a fire.
Should you wear gloves when using an angle grinder?
“Gloves should be well-fitted and provide good dexterity and the best possible protection against cut or abrasion and heat,” he said, adding that vibration resistant properties are also of benefit, specially on angle grinders that don’t have Milwaukee’s built in anti-vibration features.
